Need help from someone with factory spoiler
05-01-15, 03:06 PM
#1
Pole Position
Thread Starter
Join Date: May 2014
Location: AZ
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Need help from someone with factory spoiler
Can someone who has a functioning rear spoiler light(factory spoiler) remove their trunk lid liner and take a picture of the wiring on the left side? Would be very appreciated!
05-04-15, 07:41 PM
#3
I will try to remember to do it tomorrow... dark now so it would never show... boat motors and outdrives are strewn across the garage, so the car isn't going in there tonight lol
feel free to PM tomorrow as a reminder if nobody else chimes in sooner
What specifically are you looking to see? Colors? Routing? where they tie in?
My spoiler is now removed, but the wiring is there
feel free to PM tomorrow as a reminder if nobody else chimes in sooner
What specifically are you looking to see? Colors? Routing? where they tie in?
My spoiler is now removed, but the wiring is there
05-05-15, 01:26 PM
#6
Pole Position
Thread Starter
Join Date: May 2014
Location: AZ
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
I need to know if something is missing in this picture:
This is my wiring for what I believe is the spoiler wiring. It almost looks like there was a connector that fell off, because I have bare wires that don't seem to go anywhere. When I first removed the trunk lid liner, I remember I heard a rattling noise from the trunk lid that eventually went away after shaking it a good amount, I think whatever it was inside it finally got stuck somewhere.
I'm trying to replace my spoiler light because it doesn't work, but I'm thinking maybe this is my problem and not the LEDs themselves.
This is my wiring for what I believe is the spoiler wiring. It almost looks like there was a connector that fell off, because I have bare wires that don't seem to go anywhere. When I first removed the trunk lid liner, I remember I heard a rattling noise from the trunk lid that eventually went away after shaking it a good amount, I think whatever it was inside it finally got stuck somewhere.
I'm trying to replace my spoiler light because it doesn't work, but I'm thinking maybe this is my problem and not the LEDs themselves.
Last edited by Behemoth7; 05-05-15 at 02:07 PM.
05-05-15, 02:50 PM
#7
Mine are not red/orange.... mine were white with black stripe, and green with yellow stripe
aftermarket installation I presume? anyway....
Looks like the leads that are spliced in there should be connected to the leads in your hand... if LED's, you'll have to get polarity right, or they won't light (If you get it backwards)....
The leads that are spliced are connected to the wiring for the factory spoiler, and that white connector would connect to the end feeding the spoiler.
aftermarket installation I presume? anyway....
Looks like the leads that are spliced in there should be connected to the leads in your hand... if LED's, you'll have to get polarity right, or they won't light (If you get it backwards)....
The leads that are spliced are connected to the wiring for the factory spoiler, and that white connector would connect to the end feeding the spoiler.
Trending Topics
05-05-15, 04:06 PM
#8
Pole Position
Thread Starter
Join Date: May 2014
Location: AZ
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Mine are not red/orange.... mine were white with black stripe, and green with yellow stripe
aftermarket installation I presume? anyway....
Looks like the leads that are spliced in there should be connected to the leads in your hand... if LED's, you'll have to get polarity right, or they won't light (If you get it backwards)....
The leads that are spliced are connected to the wiring for the factory spoiler, and that white connector would connect to the end feeding the spoiler.
aftermarket installation I presume? anyway....
Looks like the leads that are spliced in there should be connected to the leads in your hand... if LED's, you'll have to get polarity right, or they won't light (If you get it backwards)....
The leads that are spliced are connected to the wiring for the factory spoiler, and that white connector would connect to the end feeding the spoiler.
Thanks again for the help, very glad I got this resolved.
Last edited by Behemoth7; 05-05-15 at 05:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post