BT and Navi questions
#1
Instructor
Thread Starter
BT and Navi questions
So we have a main driver and a secondary driver of the car. The main driver I put her iPhone as the first device for both phone and media. Second would be another iPhone. Now both users leave their BT on at all times now so the car picks up the phone of whoever used it last and switch to theri phone manually. Is there a way to make user 1 the default phone?
Only way I know to switch user (says iPhone #2 was last to use and now #1 is in) is to go into the BT settings and manually select as both phone AND media. Now if the car were far enough away from #2 would it automatically switch to #1? Or is there an easier way of doing this?
As for navi, how do you clear a current route? I did a test route (a good 60mi away) and don't know how to cancel it, even if I turn off the car completely, when I boot back up it's same route showing up.
Also how do you delete or erase the Nav map of where you've driven (the little red squares)?
I skimmed the manual a couple times (busy with other work) but I wasn't able to find my answers.
Only way I know to switch user (says iPhone #2 was last to use and now #1 is in) is to go into the BT settings and manually select as both phone AND media. Now if the car were far enough away from #2 would it automatically switch to #1? Or is there an easier way of doing this?
As for navi, how do you clear a current route? I did a test route (a good 60mi away) and don't know how to cancel it, even if I turn off the car completely, when I boot back up it's same route showing up.
Also how do you delete or erase the Nav map of where you've driven (the little red squares)?
I skimmed the manual a couple times (busy with other work) but I wasn't able to find my answers.
#4
Instructor
Thread Starter
I'm not seeing trace route though. I'm in setup---> navi---> detailed navi settings
edit: nevermind found it.
edit: nevermind found it.
Last edited by dezymond; 02-08-13 at 10:42 AM.
#6
if you've reached your dest. there is an off option at the bottom of the nav screen. put the cursor over it and click. i.e. your destination is ahead on the left, you have reached your dest. now you look at the bottom of the nav screen and you'll se the off option. it will suspend the dest. assist. nav screen goes back to normal. now if you mean the tracking dots, look at bottom of nav screen and you'll see "show on map" click it, a screen will pop up and the first option is "route trace"... turn it off.
#7
Instructor
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
JTMav
GS - 4th Gen (2013-2020)
3
02-01-16 06:32 AM