Steering wheel vibration with Vossen CV7.. help
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: DC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Steering wheel vibration with Vossen CV7.. help
Hi everyone.. I'm foreign user from Azerbaijan Republic.. I got Vossen CV7 wrapped with Nitto Invo tires two weeks ago (front: 245/35 R20, rear: 285/30 R20).. For the few days there was no any problem... But now its almost 4 days that i feel a little bit vibration of steering wheel.. I did almost everything.. Wheel alignment, wheel balance and so on.. But it doesn't help..
The roads in my location is not in good condition.. There are many bumpy road.. But i drive very accurately.. And there is no any damage in wheels. Need your help.. Is there any idea to solve it out?
P.S. i know that i fail in English.. Sorry for that..
The roads in my location is not in good condition.. There are many bumpy road.. But i drive very accurately.. And there is no any damage in wheels. Need your help.. Is there any idea to solve it out?
P.S. i know that i fail in English.. Sorry for that..
#3
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: DC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#4
Yes sir! what that will do is allow your wheel to be mounted correctly. If you had 4 yellow rings, im sure those were them. take your wheels off and put the rings on the inside of your wheels and pop them on. This will take care of your problem.
#6
Lexus Champion
iTrader: (1)
Get the rims/tires road force on those hunter road force machines and not those cheaper dynamic balancers. The road force balancers will optimize the tires on the rims for a smoother ride. Anything greater than 10 lbs of downwards road force will vibrate the steering wheel on the Lexus sedans even if its perfectly balanced dynamically with the weights. I know this from experience from many of my luxury cars and low profile rims and tires.
#7
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: DC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
djpeakSD .. Thank you so much and others who tried to help me... you were right about hub centric rings... The guys who installed my wheels, they have forgetten to place the rings... My beast runs smooth now...
Trending Topics
#8
Former Sponsor
#10
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: DC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#11
Guest
Posts: n/a
#12
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: DC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#13
Driver School Candidate
Join Date: Dec 2003
Location: Nevada
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
bads2000
GS - 3rd Gen (2006-2011)
5
07-31-15 12:25 PM