Gs350Lola

sorry if this was already posted found it on a website did it right away and it works. it posted that it would work for a gs430 but i tried it for 07 350 and it works
1. Make sure the car is in Park and the parking brake is disengaged before you start the car.
2. Start the engine.
3. Engage the parking brake.
4. Fully depress the brake pedal and then release.
5. Fully depress the brake pedal and then release.
6. Disengage the parking brake.
7. Fully depress and hold down the brake pedal.
8. Engage the parking brake, then disengage it (while holding down the brake pedal).
9. Engage the parking brake, then disengage it (while holding down the brake pedal).
10. Release the brake pedal.
11. Engage the parking brake.
12. Fully depress the brake pedal and then release.
13. Fully depress the brake pedal and then release.

DONT KILL YOURSELF! this is for my autox track

drpepper

I thought that the 350 didn't require this because it stays off when turned off with the button (430 - at least the 06 - automatically comes back on when you hit 30 or 35).

Arantant

On my 07 GS350, you just need to hold the traction control button down while in park until it beeps and then traction control and VSC turns off and stays off.

rominl

iTrader: (4)

yes i believe this sequence is only needed for 06 GS. for 07+ i think you just press and hold the trac button until vsc / trac is dsiabled

Gs350Lola

nope.... my gs 07 350 doesnt? i tried holding it but it turns off when i drive past 15mph or sumthing

drpepper

Maybe it was a mid-model year change.

rominl

iTrader: (4)

when you press and hold, did you see all the light comes up (vsc, trac, and maybe also the triangle? forgot already)?

Arantant

I think on my car you have to do it while the transmission is in park and I get a beep and then all the lights showing up.

rominl

iTrader: (4)

i think that's an requirement (car in P) when doing the press/hold

stvincent

iTrader: (5)

i didn't know this until i read this thread.

I8ABMR

think pressing the button is easier. I just got a headche after reading the instructions