2000 ES300 ECU Pinout
#3
Lead Lap
#4
Driver School Candidate
Thread Starter
Join Date: Jul 2007
Location: TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
#6
Lexus Fanatic
#7
Driver School Candidate
Thread Starter
Join Date: Jul 2007
Location: TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Anyone use them recently?
Trending Topics
#8
From what I've heard, TIS works best on internet explorer, unless you're looking at EWD for 2006 and newer as that requires additional plugins that are buggy and works better in mozilla.
#9
I did some searching around for you and I think I found what you're looking for.
I will admit I'm not sure if this is all you need as I didn't look at the linked thread.
1997 ES300 Below
I will admit I'm not sure if this is all you need as I didn't look at the linked thread.
1997 ES300 Below
Last edited by PuReChaos; 12-22-13 at 09:20 AM.
#10
Driver School Candidate
Thread Starter
Join Date: Jul 2007
Location: TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Wow, thanks for helping me out!
But.....that's the same information I have. The E7 - E10 connectors going into the ECM that are shown in the diagrams are different from what I have. All my connecters have 3 wires in the vertical direction, that wiring diagram shows 4.
I will try TIS with IE, that is the only browser I did not try.
But.....that's the same information I have. The E7 - E10 connectors going into the ECM that are shown in the diagrams are different from what I have. All my connecters have 3 wires in the vertical direction, that wiring diagram shows 4.
I will try TIS with IE, that is the only browser I did not try.
#11
I apologize, at first glance for whatever reason I looked up a 97 ES300. I just looked again and it is like you described with 3 vertical wires. I will leave the previous post up for those with a '97. Below is a 2000 ES.
The following users liked this post:
Figian19 (07-28-21)
#12
Driver School Candidate
Thread Starter
Join Date: Jul 2007
Location: TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Holy crap, THANK YOU!!!
That seems to be exactly what I am looking for. It shows the 5 harnesses going into the ECM, and the harnesses seem to have the same configuration as mine.
Thanks again!
I've been searching for days for that diagram. Did you find it on TIS?
That seems to be exactly what I am looking for. It shows the 5 harnesses going into the ECM, and the harnesses seem to have the same configuration as mine.
Thanks again!
I've been searching for days for that diagram. Did you find it on TIS?
#14
Would be happy to help. What exactly are you trying to do? I can't post the entire thing up so if you would like to narrow it down for me I can try and post what you need. And mention the year of your ES.
#15
Driver School Candidate
Join Date: Mar 2014
Location: MI
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
thanks for reply so quick, only i need ECM knock sensor pinouts 2000 ES300, with the ground detail to shielded ground wire (same kind of picture you have uploaded or shared for 1997 ES 300 in 12-22-13 post which shows brown color negitive supply to knock sensor and other sensors )