Removing Relay Integration Control Module
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2009
Location: Florida
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Removing Relay Integration Control Module
Hi guys, been a while, so glad to be back in the forums... But down to business, I want to replace the relay integration control module in my 1996 ES300... I have removed the dash panel under the steering column, and can see the module, but was wondering how to go about removing it, because it's located under the plug for hooking up an OBD-II diagnostic tool. If anyone could point me in the right direction, it would be greatly appreciated. Thanks in advance, everyone!
#3
Driver School Candidate
Thread Starter
Join Date: Jun 2009
Location: Florida
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info, worked like a charm. I've since replaced the module but no luck, the darn parking lights still stay on even when the car is off... I have tried removing the different fuses associated with the parking lights to no avail, and am considering putting in a switch for the parking lights so I don't have to open the hood and unhook the battery every time I park the car. I have been looking for more info since this problem began, but the relay integration control module is the only real lead I've gotten towards fixing it... Now I need to search for the wiring diagram for the parking lights so I can splice the wire to put a switch in the car near the dash somewhere... If you have any idea what else the problem could be, that'd be great, but if not, I do greatly appreciate your help! Have a good one!!!
Thread
Thread Starter
Forum
Replies
Last Post
Graniteman
ES - 1st to 4th Gen (1990-2006)
3
01-05-19 09:08 PM