1999 Lexus ES 300 SHIFT SOLENOID problem
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2011
Location: NY
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
1999 Lexus ES 300 SHIFT SOLENOID problem
I am getting the code 770 shift solenoid E .Does any one know where could I buy this and the best price.Some people tell me it comes in a set of 2 SOLENOIDS Do you just have to remove the pan and filter to install or you have to remove valve body?I spoke to the dealer and he faxed me a diagram with a part number 35270 then somone said it was part 35240 is this correct also he asked for last 8 VIN X5064945 I have this code for a long time .I had other codes and changed the sensors and car is running great and shifting good.Please hep me resolve this issue.I have been told it might not help,I will take a chance.
Thanks
Eli
Thanks
Eli
Last edited by nyc1836; 06-23-11 at 08:17 AM.
#2
If the car is running great, shifting good and the trans fluid is fine, don't do anything until you get a precise and correct diagnosis. Start throwing parts at it expecting to solve the problem can be frustrating and expensive. In the meantime, if you want, buy yourself a cheap (less than $50) and useful obd-2 code reader to clear the code whenever it pops up.
#3
Driver School Candidate
Thread Starter
Join Date: Jun 2011
Location: NY
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
If the car is running great, shifting good and the trans fluid is fine, don't do anything until you get a precise and correct diagnosis. Start throwing parts at it expecting to solve the problem can be frustrating and expensive. In the meantime, if you want, buy yourself a cheap (less than $50) and useful obd-2 code reader to clear the code whenever it pops up.
Thread
Thread Starter
Forum
Replies
Last Post
mcshen
ES - 1st to 4th Gen (1990-2006)
4
08-04-09 08:37 PM