IS F Swap, I Know, I know, Please read
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2016
Location: Fl
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
GS 350 swap, I Know, I know, Please read
Ok I am looking for straight facts here but I guarantee someone is going to pop in and say you should just buy the gs 350 because it would be easier. Heres where im at I bought 2 wrecked 2015 gs 350 and after finishing the job I am left with a complete swap. I have a whole car meaning engine, ecu, trans, all modules, etc. I want to Know if this would bolt directly into a 2015 is250 ? Like I said I am looking for facts only. Please chime in if you have any useful information.
Last edited by cuci591; 02-04-16 at 08:56 AM.
#3
Lexus Test Driver
Its not a direct bolt in however it can be done with some modification. If you have a complete car with engine transmission ecu, and everything, you can very well make it work. How... well looks like you should get started to figure that out.
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: Feb 2016
Location: Fl
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#10
Driver School Candidate
Thread Starter
Join Date: Feb 2016
Location: Fl
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#11
Lexus Fanatic
iTrader: (17)
Learn some grammar and make your posts a little less vague if you want serious help. Since you're such a man, get off your *** and go do the swap like the rest of us have done here. There is no magic wand or fairy that comes to your rescue. You go and you do it. Nobody is going to help you here I promise you.
#12
Lexus Test Driver
Now that we confirmed that is a GS and not an IS-F then it should be an easier swap. The 2gr and 4gr engines structurally are the same, they use the same mounting points and everything. If you have a complete car, I would say make sure that you swap over everything and theoretically, it should work
Thread
Thread Starter
Forum
Replies
Last Post