MD Mmr hr3
#1
Rookie
Thread Starter
iTrader: (1)
Join Date: Feb 2013
Location: MD
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Mmr hr3
I'm selling my MMR HR3. I worked in DC for a while and the bad roads caused two to bend. This being my first set of rims, a guy told me Simple Green would clean rims and it definitely did clean them, alone with the clear coat on a few. I am selling them best offer. They have Hankook V12 and V4 tires on them. V4 on the front and V12 on the back.
The rims are 20in staggered. Front tires are 235/35ZR20 and rear tires are 275/30ZR20
They all still hold air, they still contain the nitrogen in them from before I took them off before winter. The bends in them are only noticeable around 65 or if you lift the car up and use your hand to spin the rims and pay attention to the inside rim, they are definitely fixable.
$450 or best offer
The rims are 20in staggered. Front tires are 235/35ZR20 and rear tires are 275/30ZR20
They all still hold air, they still contain the nitrogen in them from before I took them off before winter. The bends in them are only noticeable around 65 or if you lift the car up and use your hand to spin the rims and pay attention to the inside rim, they are definitely fixable.
$450 or best offer
Last edited by mikobangz; 03-14-14 at 07:35 AM.
#3
Pole Position
iTrader: (8)
Join Date: Oct 2006
Location: Maryland
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
I can vouch for him. That's my old car and wheels. Hell of a deal considering I just put new tires on the front last year and two on the back two years ago and always had perfect alignment when she was mine.
Trending Topics
#14
did you get an estimate on how much the bends would cost to fix ? I am thinking refinishing them with plasti dip would make them look alright and would cost only a few dollars and a few hours of time. I might be interested in these