ClubLexus - Lexus Forum Discussion
0 2016/09/30 13:11:43
This isnt the best picture but Instead of doing a ton of work to try and reconfigure the grill or the back of the door panel I decided to try a simple cheap quick solution first and it worked great. I cut a piece of mdf about 1in by 1in and about 1/2 thick and we pulled the switches out and took some glue and stuck them to the side of the speaker case and it pushed the panel out just enough for the speakers to operate normally and didnt impact the look or functionality of the door one bit.
This isnt the best picture but Instead of doing a ton of work to try and reconfigure the grill or the back of the door panel I decided to try a simple cheap quick solution first and it worked great. I cut a piece of mdf about 1in by 1in and about 1/2 thick and we pulled the switches out and took some glue and stuck them to the side of the speaker case and it pushed the panel out just enough for the speakers to operate normally and didnt impact the look or functionality of the door one bit.
0 2016/05/19 18:07:12
This was actually a shot with it almost dark outside.
This was actually a shot with it almost dark outside.
0 2016/05/19 18:07:10
Rear view camera not exactly stealthy but works well. and was easy to hook up.
Rear view camera not exactly stealthy but works well. and was easy to hook up.
0 2016/05/19 18:07:06
0 2016/05/19 17:56:54
0 2016/05/19 17:55:23
0 2016/05/19 17:55:21
0 2016/05/19 17:55:18
0 2016/05/19 17:55:14
0 2016/05/14 14:24:25
Also in this one you can see the vent I mentioned earleir
Also in this one you can see the vent I mentioned earleir
0 2016/05/14 14:24:20
Compressor on. Cool air
Compressor on. Cool air
0 2016/04/23 17:51:12
Compressor off
Compressor off
0 2016/04/23 17:51:00
0 2016/04/23 17:50:57
0 2016/04/23 17:50:56
0 2016/04/23 17:50:53
0 2016/04/23 17:50:48
Proud of how hard my son worked/working on the car. From where we started to now has been an amazing change. Think once we get the paint on it will be better than when it came off the dealer lot.
Proud of how hard my son worked/working on the car. From where we started to now has been an amazing change. Think once we get the paint on it will be better than when it came off the dealer lot.
0 2016/04/12 19:43:02
0 2016/04/12 19:33:55
Not really happy with the way the doors look but they are better than what we started with.
Not really happy with the way the doors look but they are better than what we started with.
0 2016/04/12 19:33:52
0 2016/04/12 19:33:49
Installed the 6.5 Cerwin Vegas in the front doors. Plastic cover on both doors was gone. Hope by replacing this will cure my leak on black floor boards.
Installed the 6.5 Cerwin Vegas in the front doors. Plastic cover on both doors was gone. Hope by replacing this will cure my leak on black floor boards.
0 2016/04/12 19:33:45
0 2016/04/12 19:33:41
0 2016/04/12 19:33:37
0 2016/04/12 19:33:34
Mixed up to much resin so spread it over almost the entire back of the doors.
Mixed up to much resin so spread it over almost the entire back of the doors.
0 2016/04/12 19:33:31
0 2016/04/12 19:33:27
Backs of the doors like all SCs were starting to break apart etc. So tried to put some fiberglass and resin in all the spots.
Backs of the doors like all SCs were starting to break apart etc. So tried to put some fiberglass and resin in all the spots.
0 2016/04/12 19:33:23
Started rebuilding the doors. Was surprised at how good a shape the cables were in.
Started rebuilding the doors. Was surprised at how good a shape the cables were in.
0 2016/04/12 19:33:19
This small piece was all that was left of the 4x8 sheet we started with on rebuilding the trunk. Probably 1/3 was mistakes etc.
This small piece was all that was left of the 4x8 sheet we started with on rebuilding the trunk. Probably 1/3 was mistakes etc.
0 2016/04/12 19:33:14
0 2016/04/05 05:29:14
0 2016/04/05 05:29:10
Got all four calipers painted. Will post pictures later.
Got all four calipers painted. Will post pictures later.
0 2016/04/03 20:02:09
Wrapped with tape wire loom ordered
Wrapped with tape wire loom ordered
0 2016/04/03 20:02:07
He started working on around 8pm and finished around 3am.
He started working on around 8pm and finished around 3am.
0 2016/04/03 20:02:04
Rip in the liner right below the harness.
Rip in the liner right below the harness.
0 2016/04/03 20:02:02
Fortunate wiring harness hadnt been rubbed yet but you can see from the next picture it wasnt going to be long.
Fortunate wiring harness hadnt been rubbed yet but you can see from the next picture it wasnt going to be long.
0 2016/04/03 20:01:58
Took out the liner and found another pile of leaves and trash.
Took out the liner and found another pile of leaves and trash.
0 2016/04/03 20:01:56
Trunk redone. Still need to recenter and screw down but looks a ton better and subs sound great now that both are enclosed and sealed. Subs are dual voice coil 4ohm. I should have gotten 2ohm since the amp is stable down to 2ohm but the amp is still putting out enough to shake the car.
Trunk redone. Still need to recenter and screw down but looks a ton better and subs sound great now that both are enclosed and sealed. Subs are dual voice coil 4ohm. I should have gotten 2ohm since the amp is stable down to 2ohm but the amp is still putting out enough to shake the car.
0 2016/03/30 19:03:32
After it hardened sawed off to make even.
After it hardened sawed off to make even.
0 2016/03/30 19:03:27