ClubLexus - Lexus Forum Discussion
0 2015/05/16 11:38:25
0 2015/05/14 04:51:44
0 2015/05/07 15:55:43
Pioneer AVH-X5700BHS Pioneer XM Beat Sonic License Plate Camera
Pioneer AVH-X5700BHS Pioneer XM Beat Sonic License Plate Camera
0 2015/05/06 13:33:55
0 2015/05/05 22:32:50
0 2015/05/05 22:31:46
0 2015/05/05 22:31:38
0 2015/05/05 13:58:36
0 2015/04/25 08:04:25
Reassembled and ready to go!
Reassembled and ready to go!
0 2015/04/16 16:30:30
At this point the tweeter, mirror and door ECU have been removed. The window track nuts were also removed and this allowed the rubber seal to be removed easily.
At this point the tweeter, mirror and door ECU have been removed. The window track nuts were also removed and this allowed the rubber seal to be removed easily.
0 2015/04/16 16:30:21
These harbor freight tools are great!!!
These harbor freight tools are great!!!
0 2015/04/16 16:30:13
0 2015/04/16 16:30:05
0 2015/04/16 16:29:57
0 2015/04/16 16:29:49
0 2015/04/16 16:29:40
An old computer hard drive magnet
An old computer hard drive magnet
0 2015/03/25 13:41:16
Computer hard drive magnet
Computer hard drive magnet
0 2015/03/25 13:41:08
Actually your disk is one year newer than mine. Note that you have the update caution at the bottom and mine does not. Also the year on my disk is 2000. Hope this helps a little.
Actually your disk is one year newer than mine. Note that you have the update caution at the bottom and mine does not. Also the year on my disk is 2000. Hope this helps a little.
0 2015/03/21 13:34:52
0 2015/03/21 08:09:21
0 2015/03/21 07:11:49
0 2015/03/21 07:11:40
0 2015/03/21 07:11:29
The engine was refilled with water and antifreeze. The engine was a little hard to start because I sprayed the throttle body with it on the car. This made the car smoke a little when I fired her up and it threw some codes. No big deal, I just hooked up the code checker and erased them. I let it warm up, checked for any issues and took her for a test drive. Nice throttle response and she ran Great!
The engine was refilled with water and antifreeze. The engine was a little hard to start because I sprayed the throttle body with it on the car. This made the car smoke a little when I fired her up and it threw some codes. No big deal, I just hooked up the code checker and erased them. I let it warm up, checked for any issues and took her for a test drive. Nice throttle response and she ran Great!
0 2015/03/20 12:16:53
0 2015/03/20 12:16:11
We were nearing completion at this point. Next was the radiator and air intake components.
We were nearing completion at this point. Next was the radiator and air intake components.
0 2015/03/20 12:05:29
0 2015/03/20 12:05:21
This is a view looking up at the AC compressor. Three bolts and a nut. Just loosen the nut but do not remove, loosen a three bolts but only two need to come out, the third will stay in the slot. I used zip ties to hang the engine accessories out of the way.
This is a view looking up at the AC compressor. Three bolts and a nut. Just loosen the nut but do not remove, loosen a three bolts but only two need to come out, the third will stay in the slot. I used zip ties to hang the engine accessories out of the way.
0 2015/03/20 12:05:13
I only have the before picture of the throttle body, it is nice and clean now but I forgot to take a picture. I also cleaned the mass airflow sensor. I used CRC mass airflow cleaner and CRC throttle body cleaner! You can find it a wal-mart.
I only have the before picture of the throttle body, it is nice and clean now but I forgot to take a picture. I also cleaned the mass airflow sensor. I used CRC mass airflow cleaner and CRC throttle body cleaner! You can find it a wal-mart.
0 2015/03/20 12:05:06
0 2015/03/20 12:04:58
This is our homemade SST in action and it worked perfectly, at a cost of $27.
This is our homemade SST in action and it worked perfectly, at a cost of $27.
0 2015/03/20 12:04:53
Make sure all of the many connectors are reconnected.
Make sure all of the many connectors are reconnected.
0 2015/03/20 12:04:45
0 2015/03/20 11:57:22
The previous pictures of the timing belt were of me just messing around with the belt fit. The belt left marking goes on the left drivers side. And right goes on the right passenger side.
The previous pictures of the timing belt were of me just messing around with the belt fit. The belt left marking goes on the left drivers side. And right goes on the right passenger side.
0 2015/03/20 11:57:14
I am wondering if anyone else noticed the mark was off just a little to the right or clockwise position. The left side was perfect and the main was perfect. The red mark is from the factory, the black mark is mine.
I am wondering if anyone else noticed the mark was off just a little to the right or clockwise position. The left side was perfect and the main was perfect. The red mark is from the factory, the black mark is mine.
0 2015/03/20 11:57:07
0 2015/03/20 11:57:00
We are finished for the day...more tomorrow!
We are finished for the day...more tomorrow!
0 2015/03/19 15:42:28
Just dry filling the timing belt after the new water pump and thermostat were installed
Just dry filling the timing belt after the new water pump and thermostat were installed
0 2015/03/19 15:42:20
0 2015/03/19 15:42:14
The puller on the harmonic balancer after the crank bolt was removed.
The puller on the harmonic balancer after the crank bolt was removed.
0 2015/03/19 15:42:05