ClubLexus - Lexus Forum Discussion
0 2017/10/07 14:42:36
0 2017/09/24 06:35:48
0 2017/09/24 06:35:44
0 2017/08/19 10:14:41
0 2017/08/19 10:12:40
0 2017/08/19 10:12:35
0 2017/08/19 10:12:32
0 2017/08/19 10:12:28
0 2017/08/19 10:12:24
After picture, passenger side. Did the same as I had done with the driver's side.
After picture, passenger side. Did the same as I had done with the driver's side.
0 2017/08/12 15:06:45
After picture, passenger side cover. Did the same as I had done on the driver's side.
After picture, passenger side cover. Did the same as I had done on the driver's side.
0 2017/08/12 15:06:12
Before picture, passenger side. Same as driver's side. Naked.
Before picture, passenger side. Same as driver's side. Naked.
0 2017/08/12 15:05:39
Before picture, passenger side. Same as the driver's side. Lexus had fabric tape at certain areas.
Before picture, passenger side. Same as the driver's side. Lexus had fabric tape at certain areas.
0 2017/08/12 15:04:51
After picture, center speaker area. I applied the sound deadening felt pads on the 4 corners making sure that it wrapped the top lip. Also, since I noticed the wire had play, I applied the felt pad around the location where the wire is coming from.
After picture, center speaker area. I applied the sound deadening felt pads on the 4 corners making sure that it wrapped the top lip. Also, since I noticed the wire had play, I applied the felt pad around the location where the wire is coming from.
0 2017/08/12 15:00:23
After picture, center speaker cover. Applied moleskin on all the tabs. Applied the sound deadening felt pad on the top of the cover, inbetween the two tabs. I also noticed the wire area had a little play, so I wrapped it up with moleskin as well.
After picture, center speaker cover. Applied moleskin on all the tabs. Applied the sound deadening felt pad on the top of the cover, inbetween the two tabs. I also noticed the wire area had a little play, so I wrapped it up with moleskin as well.
0 2017/08/12 14:56:45
Before picture center speaker area. As you can see, this is also bare bones.
Before picture center speaker area. As you can see, this is also bare bones.
0 2017/08/12 14:54:26
Before picture center speaker cover. Lexus did not apply any fabric tape at all.
Before picture center speaker cover. Lexus did not apply any fabric tape at all.
0 2017/08/12 14:50:46
After picture, added 2 sound deadening felt pads at the top and 1 pad that runs across inbetween the two screws at the top.
After picture, added 2 sound deadening felt pads at the top and 1 pad that runs across inbetween the two screws at the top.
0 2017/08/12 14:44:04
After picture, added moleskin to the tabs that Lexus didn't fabric taped. Also applied the sound deadening felt pad near the bottom left corner.
After picture, added moleskin to the tabs that Lexus didn't fabric taped. Also applied the sound deadening felt pad near the bottom left corner.
0 2017/08/12 14:42:02
Barebones driver speaker area, before picture
Barebones driver speaker area, before picture
0 2017/08/12 14:38:41
Driver speaker cover, before picture.
Driver speaker cover, before picture.
0 2017/08/12 14:37:38
0 2017/07/25 09:07:07
0 2017/06/30 15:12:03
Large is a loose fit.
Large is a loose fit.
0 2017/06/18 08:24:36
0 2017/05/31 10:26:06
0 2017/05/31 10:26:03
0 2017/05/31 10:25:59
0 2017/05/31 10:25:55
0 2017/05/19 20:11:22
0 2017/04/28 18:36:42
0 2017/04/28 18:36:35
0 2017/04/28 18:34:56
0 2017/04/28 18:34:47
0 2017/03/31 19:43:09
0 2017/03/31 19:43:08
0 2017/03/09 12:47:37
This is the finished look. Yes, the fuzzy skin tone material is still a little visible after using a black marker, however, the rattling is gone completely from this area. I'm happy.
This is the finished look. Yes, the fuzzy skin tone material is still a little visible after using a black marker, however, the rattling is gone completely from this area. I'm happy.
0 2017/02/12 11:09:58
So I thought I would use moleskin on these tabs on the top, but it didn't quite fit back in, so I had to remove. I did however, added more moleskin on the bottom tabs and wrapped it from front to the back of the tab.
So I thought I would use moleskin on these tabs on the top, but it didn't quite fit back in, so I had to remove. I did however, added more moleskin on the bottom tabs and wrapped it from front to the back of the tab.
0 2017/02/12 11:09:56
I cut out the mole foam for the surface, and cut moleskin for the walls surrounding. I also used a black marker to color in the materials used, so that I can hide it better. If you can find black moleskin or foam that would be great. Yes, I went overkill and just wanted to make sure this area won't make a peep of sound anymore.
I cut out the mole foam for the surface, and cut moleskin for the walls surrounding. I also used a black marker to color in the materials used, so that I can hide it better. If you can find black moleskin or foam that would be great. Yes, I went overkill and just wanted to make sure this area won't make a peep of sound anymore.
0 2017/02/12 11:09:54
As you can see here, Lexus thought adding these two small and thin felt stickers would address the rattling issues.
As you can see here, Lexus thought adding these two small and thin felt stickers would address the rattling issues.
0 2017/02/12 11:09:51