ClubLexus - Lexus Forum Discussion
Remove everything from the trunk
Remove everything from the trunk
0 2015/06/22 07:59:21
remove two clips, 3 slide clips and the connector to the light. There are three other slide type cups that are near the weather strip but they just slide back when you bull back on the liner
remove two clips, 3 slide clips and the connector to the light. There are three other slide type cups that are near the weather strip but they just slide back when you bull back on the liner
0 2015/06/22 08:00:24
0 2015/06/22 08:00:44
0 2015/06/22 08:00:50
I removed this clip first
I removed this clip first
0 2015/06/22 08:00:53
This one second
This one second
0 2015/06/22 08:00:55
used two screw drivers to remove.
used two screw drivers to remove.
0 2015/06/22 08:01:01
0 2015/06/22 08:05:06
0 2015/06/22 08:05:09
Not just reverse it. I would install the front side (left in this picture) of the strut first.
Not just reverse it. I would install the front side (left in this picture) of the strut first.
0 2015/06/22 08:13:53
remove both rubber bumpers so you can connect the other end. They just snap into the nipple. No need to pry the clip open.
remove both rubber bumpers so you can connect the other end. They just snap into the nipple. No need to pry the clip open.
0 2015/06/22 08:13:56
with out removing the number you will have a real hard time compressing the lift support.
with out removing the number you will have a real hard time compressing the lift support.
0 2015/06/22 08:14:28
0 2015/06/22 08:14:31
0 2015/06/22 08:14:36
Remove rubber bumpers from both sides. It gives you the needed room to snap the lift on. Without taking the bummer off you will need to compress the lift. Good luck with that.
Remove rubber bumpers from both sides. It gives you the needed room to snap the lift on. Without taking the bummer off you will need to compress the lift. Good luck with that.
0 2015/06/22 08:20:53
0 2015/06/22 08:20:55
0 2015/06/22 08:20:59
I would install the front( left side of this picture) side of the lift first then the other side.
I would install the front( left side of this picture) side of the lift first then the other side.
0 2015/06/22 08:21:02
snap the lift on the nipple
snap the lift on the nipple
0 2015/06/22 08:21:05