ClubLexus - Lexus Forum Discussion
0 2015/03/06 18:04:12
0 2015/04/12 22:17:47
0 2015/04/12 22:18:02
0 2015/04/12 22:18:26
0 2015/04/12 22:18:33
0 2015/04/12 22:18:39
0 2015/04/12 22:18:46
0 2015/07/05 13:27:06
0 2015/07/05 13:27:07
0 2015/07/05 13:27:08
0 2015/07/06 20:59:39
0 2016/03/06 13:39:25
0 2016/05/04 18:51:16
0 2016/05/04 18:51:17
0 2016/06/23 18:49:36
0 2016/06/23 18:49:37
0 2016/06/23 18:49:38
0 2016/06/23 18:55:00
0 2016/06/23 18:57:48
0 2016/06/23 18:58:51
0 2016/06/23 18:58:53
eLevel sits nicely inside.
eLevel sits nicely inside.
0 2016/06/23 18:59:47
Top and bottom bolts mount good. The ABS wire harness mounting was not the same.
Top and bottom bolts mount good. The ABS wire harness mounting was not the same.
0 2016/06/23 18:59:49
Rear bag mounts good, as with the 2010, I have to drill the hole for the rear LCA to secure the bottom of the bag.
Rear bag mounts good, as with the 2010, I have to drill the hole for the rear LCA to secure the bottom of the bag.
0 2016/06/23 18:59:50
Old set up drops right in.
Old set up drops right in.
0 2016/06/23 18:59:52
0 2016/06/23 19:02:00
0 2016/06/23 19:02:02
0 2016/06/23 19:02:03
Airrunner strut designed for a 2010 where the ABS harness clamps on with claw style plastic. On the 2016, there is a welded bracket. The 2010 style clamp was not available without buying the complete harness. I decided to tap and thread the hole where the claw clamp would go.
Airrunner strut designed for a 2010 where the ABS harness clamps on with claw style plastic. On the 2016, there is a welded bracket. The 2010 style clamp was not available without buying the complete harness. I decided to tap and thread the hole where the claw clamp would go.
0 2016/06/23 19:02:24
0 2016/06/24 07:03:46
0 2016/07/03 17:07:18
0 2016/07/03 17:07:19
0 2016/07/03 17:07:40
0 2016/07/03 17:07:40
0 2016/07/03 17:07:41
0 2018/09/19 20:26:36
0 2018/09/19 20:30:14
0 2018/09/19 20:30:15
0 2021/02/25 09:52:57
0 2021/02/25 09:59:51