ClubLexus - Lexus Forum Discussion
0 2016/03/12 19:14:46
One side box for sub amp and other for front and rear speaker amp.
One side box for sub amp and other for front and rear speaker amp.
0 2016/03/12 19:14:52
0 2016/03/12 19:14:59
Decided to try fiberglass boxes in rear sidewalls. Never had used fiberglass and figured would be worth trying.
Decided to try fiberglass boxes in rear sidewalls. Never had used fiberglass and figured would be worth trying.
0 2016/03/12 19:15:03
0 2016/03/12 19:15:08
0 2016/03/12 19:15:13
0 2016/03/12 19:15:18
Looked good till I pulled them out and did something wrong with hardner. After tons of work turns out they had drooped a little and wouldnt fit so gave up and went back with wood.
Looked good till I pulled them out and did something wrong with hardner. After tons of work turns out they had drooped a little and wouldnt fit so gave up and went back with wood.
0 2016/03/12 19:15:24
0 2016/03/12 19:15:31
0 2016/03/12 19:15:38
Fitting side wall with face of sub box
Fitting side wall with face of sub box
0 2016/03/12 19:15:41
0 2016/03/12 19:15:45
Ended up having to put several pieces on the front of the face plate in order to gain clearance with back of sub and back of sub box.
Ended up having to put several pieces on the front of the face plate in order to gain clearance with back of sub and back of sub box.
0 2016/03/12 19:15:51
Floor support over tire was broken and cover on it was ripped so decided to build new one.
Floor support over tire was broken and cover on it was ripped so decided to build new one.
0 2016/03/12 19:15:57
Cut in two pieces so that would make easier to remove spare tire.
Cut in two pieces so that would make easier to remove spare tire.
0 2016/03/12 19:16:03
Wiring for amp box. Not the most professional but will do for us. Amps sit on about two inch risers so that air can flow underneath them.
Wiring for amp box. Not the most professional but will do for us. Amps sit on about two inch risers so that air can flow underneath them.
0 2016/03/12 19:16:05
Lids cut to allow about 1/4 in of the amps to stick thru and also allow for tuning if needed.
Lids cut to allow about 1/4 in of the amps to stick thru and also allow for tuning if needed.
0 2016/03/12 19:16:08
Drivers side sub.
Drivers side sub.
0 2016/03/12 19:16:13
Passenger side sub. I still need to pull and build box behind it. Right now its more of a free air sub.
Passenger side sub. I still need to pull and build box behind it. Right now its more of a free air sub.
0 2016/03/12 19:16:18
90% of rear trunk stereo finished. Still need to build pass sub back box and put side wall panels in a couple of places that cut.
90% of rear trunk stereo finished. Still need to build pass sub back box and put side wall panels in a couple of places that cut.
0 2016/03/12 19:16:23
Harmonic balancer came apart while driving. Found this one new off ebay from company in Norcross ga for about $65 new and fit perfect.
Harmonic balancer came apart while driving. Found this one new off ebay from company in Norcross ga for about $65 new and fit perfect.
0 2016/03/12 19:16:27
0 2016/03/12 19:16:38
0 2016/03/12 19:16:52
0 2016/03/12 19:17:03
0 2016/03/12 19:17:11
0 2016/03/12 19:17:20
Still have alot to do. Need to rebuild door panels and install new 6.5 in door and new tweeters. Hopefully will get to in the next couple of weeks. When I do will add pictures. And of course the paint job.
Still have alot to do. Need to rebuild door panels and install new 6.5 in door and new tweeters. Hopefully will get to in the next couple of weeks. When I do will add pictures. And of course the paint job.
0 2016/03/12 19:17:27
0 2016/03/17 19:12:09
0 2016/03/18 18:26:01
Not original rear floor mats but close fit. Beige color before SEM
Not original rear floor mats but close fit. Beige color before SEM
0 2016/03/23 18:03:32
First coat of SEM
First coat of SEM
0 2016/03/23 18:03:39
Second coat of SEM. Didnt take picture after brushing but they look alot better than picture
Second coat of SEM. Didnt take picture after brushing but they look alot better than picture
0 2016/03/23 18:03:49
Factory light gray front floor mats. I wanted them to match the back ones and the darker trim plus I still had a little but of stain but after $8 of quarters at the pressure washer they came out pretty clean especially considering they are 22years old or I assume they are. The Lexus logo was faded out and I forgot to take a before picture but this was after three coats and just like the rear ones they looked alot better after brushing.
Factory light gray front floor mats. I wanted them to match the back ones and the darker trim plus I still had a little but of stain but after $8 of quarters at the pressure washer they came out pretty clean especially considering they are 22years old or I assume they are. The Lexus logo was faded out and I forgot to take a before picture but this was after three coats and just like the rear ones they looked alot better after brushing.
0 2016/03/23 18:03:55
Took to the mechanic today to figure out oil leak and valve cover gaskets where bad. There was so much oil the spark plugs where submerged in oil.
Took to the mechanic today to figure out oil leak and valve cover gaskets where bad. There was so much oil the spark plugs where submerged in oil.
0 2016/03/23 18:04:01
Car has started leaking really bad over the past few months to where I was having to put a quart of oil in every 500 miles.
Car has started leaking really bad over the past few months to where I was having to put a quart of oil in every 500 miles.
0 2016/03/23 18:04:02
Had to replace the valve covers they were to corroded.
Had to replace the valve covers they were to corroded.
0 2016/03/28 15:36:02
0 2016/03/28 15:36:08
Picked up a set of used covers amazing the shape they are in compared to ones that came off.
Picked up a set of used covers amazing the shape they are in compared to ones that came off.
0 2016/03/28 15:36:16
Painted and ready to go back on car
Painted and ready to go back on car
0 2016/03/28 15:36:21
So far everything Ive built has been on this wafer board table I threw together 22 years ago.
So far everything Ive built has been on this wafer board table I threw together 22 years ago.
0 2016/03/28 15:48:50