ClubLexus - Lexus Forum Discussion
All done! This is beyond my expectations for my first air suspension install!
All done! This is beyond my expectations for my first air suspension install!
0 2024/02/29 18:47:29
0 2024/02/29 18:47:26
A couple days later I got to finish carpeting the wings for the false floor.
A couple days later I got to finish carpeting the wings for the false floor.
0 2024/02/29 18:47:24
I built a support for the air tank and found these nifty aluminum thumb screws to secure it without any tools.
I built a support for the air tank and found these nifty aluminum thumb screws to secure it without any tools.
0 2024/02/29 18:47:21
Time for paint, I wanted something metallic and this blue was really handsome.
Time for paint, I wanted something metallic and this blue was really handsome.
0 2024/02/29 18:47:19
Since I'm not really doing any step-by-steps, we'll jump to everything getting mounted and the bulkhead fittings getting drilled for the board.
Since I'm not really doing any step-by-steps, we'll jump to everything getting mounted and the bulkhead fittings getting drilled for the board.
0 2024/02/29 18:47:16
uuuuunnnffffffff
uuuuunnnffffffff
0 2024/02/29 18:47:13
It's done! This is the first pic of the finished install and it was working!
It's done! This is the first pic of the finished install and it was working!
0 2024/02/29 18:47:10
For now I'm using a low profile mount for the controller on the Beatsonic bezel. Idk if I'll attempt a insert mount in the ashtray or something, but this is fine for now.
For now I'm using a low profile mount for the controller on the Beatsonic bezel. Idk if I'll attempt a insert mount in the ashtray or something, but this is fine for now.
0 2024/02/29 18:47:07
I like the lower height, it should make it possible for me add a shallow subwoofer bow mounted to the parcel shelf in the future.
I like the lower height, it should make it possible for me add a shallow subwoofer bow mounted to the parcel shelf in the future.
0 2024/02/28 06:13:31
Cut out the opening for the recessed tank
Cut out the opening for the recessed tank
0 2024/02/28 06:13:28
Middle platform and two wings to make it easier to take in and out.
Middle platform and two wings to make it easier to take in and out.
0 2024/02/28 06:13:20
Starting to get general dimensions and drawing out cut lines, where the tank is going to sit, etc.
Starting to get general dimensions and drawing out cut lines, where the tank is going to sit, etc.
0 2024/02/28 06:13:12
This is better. Mount the compressors on their side to save headroom.
This is better. Mount the compressors on their side to save headroom.
0 2024/02/28 06:13:03
Cut out the shape of the trunk from MDF
Cut out the shape of the trunk from MDF
0 2024/02/28 06:13:01
Reversed the compressors to try to save height, but I still don't like it. I'll solve this in a minute.
Reversed the compressors to try to save height, but I still don't like it. I'll solve this in a minute.
0 2024/02/28 06:12:47
Initial layup for approximation.
Initial layup for approximation.
0 2024/02/28 06:12:45
0 2024/02/26 19:47:48
0 2024/02/14 13:41:26
0 2024/01/19 18:30:30
0 2024/01/19 18:30:27
0 2024/01/19 18:30:25
0 2024/01/19 18:30:22
0 2024/01/19 18:17:10
0 2024/01/19 18:17:03
0 2023/06/13 09:37:34
0 2023/06/13 09:37:32
0 2023/06/13 09:37:27
0 2023/02/07 04:21:09
0 2023/02/07 04:13:20
0 2023/02/07 04:13:18
0 2023/02/07 04:13:16
0 2023/02/07 04:09:53
0 2023/02/07 04:09:51
0 2023/02/07 04:03:28
0 2023/01/17 07:24:43
0 2023/01/17 07:24:40
0 2022/11/16 12:11:50
0 2022/11/11 13:04:43
0 2022/11/11 12:55:41