ClubLexus - Lexus Forum Discussion
Make sure the brake hose is supported to prevent damage.
Make sure the brake hose is supported to prevent damage.
0 2024/05/20 21:16:54
One bolt in the bottom of the strut. Use a hydraulic jack to hold the bottom of the shock
One bolt in the bottom of the strut. Use a hydraulic jack to hold the bottom of the shock
0 2024/05/20 21:16:50
You only have to unbolt the top (to loose it, hit it with a big hammer). Unbolt the 3 top shock bolts from the hood.
You only have to unbolt the top (to loose it, hit it with a big hammer). Unbolt the 3 top shock bolts from the hood.
0 2024/05/20 21:16:34
I cut it with the grinder from the trunk
I cut it with the grinder from the trunk
0 2021/01/18 14:42:48
Home made cardboard speaker template
Home made cardboard speaker template
0 2021/01/18 14:38:43
Hm made cutting template
Hm made cutting template
0 2021/01/18 14:35:05
Passenger metal piece cut out
Passenger metal piece cut out
0 2021/01/18 14:33:27
Passenger rear deck. I had to cut the hole with a grinder and metal snips.
Passenger rear deck. I had to cut the hole with a grinder and metal snips.
0 2021/01/18 14:29:11
Speaker replaced the factory sub.
Speaker replaced the factory sub.
0 2021/01/18 14:27:00
0 2021/01/18 14:22:30
0 2021/01/09 12:59:29
I cut this hole as "U" shape and my radio has almost no gap. I will post a picture tonight.
I cut this hole as "U" shape and my radio has almost no gap. I will post a picture tonight.
0 2021/01/05 11:29:31
0 2021/01/05 09:21:27
2007 lexus speakers/sub connectors with no dsp
2007 lexus speakers/sub connectors with no dsp
0 2020/12/22 23:37:19
Tesla style radio
Tesla style radio
0 2020/12/22 23:34:59
2007 lexus is350 speakers/sub connectors
2007 lexus is350 speakers/sub connectors
0 2020/12/22 23:30:14
0 2020/12/02 18:05:26
0 2020/11/16 10:43:46
Speaker cheat sheet
Speaker cheat sheet
0 2020/11/07 21:27:47
0 2020/11/07 20:58:05
0 2020/11/07 20:57:09
0 2020/11/07 20:56:14
0 2020/11/07 20:54:53
0 2020/11/07 20:53:49
0 2020/11/07 20:52:29
This is the tread for summing the bass frequencies
This is the tread for summing the bass frequencies
0 2020/11/07 20:50:49
0 2020/09/13 23:20:09
0 2020/09/13 23:19:17
Bleeding fitting on top the caliper.
Bleeding fitting on top the caliper.
0 2020/09/13 23:18:24
About $20
About $20
0 2020/09/13 23:17:34
Amp kit
Amp kit
0 2020/07/03 00:32:35
All the wires are run to the passenger side. I did not have to take off the rear seat. Use a hang rope to feed the wires. I ground the black wire to the metal (sand it first to expose the metal) with self tap screw).
All the wires are run to the passenger side. I did not have to take off the rear seat. Use a hang rope to feed the wires. I ground the black wire to the metal (sand it first to expose the metal) with self tap screw).
0 2020/07/03 00:20:08
Taps in connectors B and C
Taps in connectors B and C
0 2020/07/03 00:05:41
LC2( 80 watts max input) standard color codes. Solid color wires + solid with black stripe wires - Yellow wire connect to positive 12v (from the positive red thick wire feeding the amp). Black color ground (to the sanded metal screw where the factory amp is bolted. I put the taps already so I can connect to factory amp wires (already tapped)
LC2( 80 watts max input) standard color codes. Solid color wires + solid with black stripe wires - Yellow wire connect to positive 12v (from the positive red thick wire feeding the amp). Black color ground (to the sanded metal screw where the factory amp is bolted. I put the taps already so I can connect to factory amp wires (already tapped)
0 2020/07/02 23:57:16
$20. I get it in walmart but you can also get it online.
$20. I get it in walmart but you can also get it online.
0 2020/07/02 23:55:21
ML amp from Left to right connector A,B in the first slot. C in the second slot. D in the 3rd slot. And the blue socket.
ML amp from Left to right connector A,B in the first slot. C in the second slot. D in the 3rd slot. And the blue socket.
0 2020/07/02 23:50:50
I do not cut the wires. I just tap them. I left the factory rear woofer connected plus the extra subwoofer I added.
I do not cut the wires. I just tap them. I left the factory rear woofer connected plus the extra subwoofer I added.
0 2020/07/02 23:47:19
I use a tap with this to connect the remote wire to the cigarret + wire.
I use a tap with this to connect the remote wire to the cigarret + wire.
0 2020/07/02 23:38:52
LC2 with volume remote for the woofer
LC2 with volume remote for the woofer
0 2020/07/02 23:35:14
Factory Amp. Connectors A,B,C and D. From the front of the car start Connector A and connector D at the rear of the car.
Factory Amp. Connectors A,B,C and D. From the front of the car start Connector A and connector D at the rear of the car.
0 2020/07/02 23:28:19