ClubLexus - Lexus Forum Discussion
0 2014/08/08 12:02:59
0 2014/08/08 12:03:06
The Old O2 Sensor I pulled off the car
The Old O2 Sensor I pulled off the car
0 2014/08/08 12:03:09
0 2014/08/08 12:03:14
0 2014/08/08 12:03:19
0 2014/08/08 12:03:24
A close up of the breaker bar with o2 sensor removal tool attached
A close up of the breaker bar with o2 sensor removal tool attached
0 2014/08/08 12:05:11
This is the old O2 sensor.
This is the old O2 sensor.
0 2014/08/08 12:05:15
Spray some PB blaster on it and wait 5 minutes, place the O2 Sensor removal socket onto sensor, stick the breaker bar on, and turn counter clockwise. I leveraged the tire and kicked it with my feet to loosen.
Spray some PB blaster on it and wait 5 minutes, place the O2 Sensor removal socket onto sensor, stick the breaker bar on, and turn counter clockwise. I leveraged the tire and kicked it with my feet to loosen.
0 2014/08/08 12:05:20
3. jiggle this black part to remove it from the car
3. jiggle this black part to remove it from the car
0 2014/08/08 12:05:25
1. Using a flathead, stick flathead into bottom of harness and then pull back cabling attached to car. 2. remove the clip attached to the "horseshoe" of the car by pressing the clips in from the other side.
1. Using a flathead, stick flathead into bottom of harness and then pull back cabling attached to car. 2. remove the clip attached to the "horseshoe" of the car by pressing the clips in from the other side.
0 2014/08/08 12:05:30
All the tools. O2 Sensor removal socket, 1/2" breaker bar, ratcheting socket wrench, pliers, flat head screwdriver, PB blaster, flash light and safety glasses
All the tools. O2 Sensor removal socket, 1/2" breaker bar, ratcheting socket wrench, pliers, flat head screwdriver, PB blaster, flash light and safety glasses
0 2014/08/08 12:07:34
1
1
0 2014/08/08 12:12:24
2
2
0 2014/08/08 12:12:30
6
6
0 2014/08/08 12:12:34
5
5
0 2014/08/08 12:12:39
4
4
0 2014/08/08 12:12:43
3
3
0 2014/08/08 12:12:48
0 2015/04/26 18:17:52
0 2015/04/26 18:17:56
0 2015/10/19 16:08:49
0 2015/11/07 13:58:51
0 2015/11/07 13:58:56
0 2015/11/07 13:59:01
0 2015/11/07 13:59:06
0 2015/11/08 23:32:19
0 2016/04/06 16:36:28
0 2016/04/06 16:36:32
0 2016/04/06 16:36:36
0 2016/04/28 21:07:15
0 2016/04/28 21:07:24
0 2016/04/28 21:07:33
0 2016/04/28 21:07:44
0 2016/10/01 10:18:18
3 pin is some oem connector tied behind the wiper fluid resevoir. black/yellow one is the aftermarket harness connector for the foglight.
3 pin is some oem connector tied behind the wiper fluid resevoir. black/yellow one is the aftermarket harness connector for the foglight.
0 2016/10/02 18:15:55
OEM JDM fogs installed
OEM JDM fogs installed
0 2016/10/02 18:16:41
Aftermarket harness and switch. button matches perfectly to the oem switch gear.
Aftermarket harness and switch. button matches perfectly to the oem switch gear.
0 2016/10/02 18:17:13
KYB SB104 Strut Bellows
KYB SB104 Strut Bellows
0 2017/12/29 07:17:24
KYB SB104 Strut Bellows
KYB SB104 Strut Bellows
0 2017/12/29 07:17:25
KYB SB104 Strut Bellows
KYB SB104 Strut Bellows
0 2017/12/29 07:17:26