ClubLexus - Lexus Forum Discussion
0 2020/12/13 06:14:53
0 2020/12/13 06:14:58
0 2020/12/13 06:15:03
0 2020/12/13 06:15:09
Here is the window switch connector on the driver side. On the top row the second wire on the left is the ground. That pinkish wire to the right of the ground is the dimming wire. This is what I initially had tapped and wish it would work however it's creating interference making the clock come on when the car is off. Such a bummer because ideally this is the wire that you would be tapping to get the cool dimming feature.
Here is the window switch connector on the driver side. On the top row the second wire on the left is the ground. That pinkish wire to the right of the ground is the dimming wire. This is what I initially had tapped and wish it would work however it's creating interference making the clock come on when the car is off. Such a bummer because ideally this is the wire that you would be tapping to get the cool dimming feature.
0 2020/12/13 06:32:10
Just a little bit closer picture second wire top left row. White wire with black stripe is the ground.
Just a little bit closer picture second wire top left row. White wire with black stripe is the ground.
0 2020/12/13 06:32:18
This is the same connector except turn so that you can see the other side. Here you will see the thicker green wire notice it's the only wire on this side. This is the 12-volt wire that will become live when you have your headlights on.
This is the same connector except turn so that you can see the other side. Here you will see the thicker green wire notice it's the only wire on this side. This is the 12-volt wire that will become live when you have your headlights on.
0 2020/12/13 06:32:25
Disappear to be the same wires going out to the mirror which I can assume is probably powering the auto dim feature on the driver side mirror I have not probe these yet I'm only showing the colors but these colors match the colors as well in the harness. I can post more information once I probe these as well so this would be also be a possible tap point if you did not want to have to undo some electrical tape.
Disappear to be the same wires going out to the mirror which I can assume is probably powering the auto dim feature on the driver side mirror I have not probe these yet I'm only showing the colors but these colors match the colors as well in the harness. I can post more information once I probe these as well so this would be also be a possible tap point if you did not want to have to undo some electrical tape.
0 2020/12/13 06:32:30
This is the part number on the driver's side.
This is the part number on the driver's side.
0 2020/12/13 06:32:35
0 2020/12/13 06:32:42
0 2020/12/15 15:24:50
0 2020/12/16 18:55:36
0 2020/12/16 18:55:38
0 2020/12/17 19:56:37
0 2020/12/17 20:05:42
0 2020/12/18 08:14:36
0 2020/12/18 08:14:39
Window control harness/plug. Thicker green wire is 12v + when headlights are on. Thinner white wire with black stripe is ground.
Window control harness/plug. Thicker green wire is 12v + when headlights are on. Thinner white wire with black stripe is ground.
0 2020/12/21 17:10:01
Thicker green wire is 12v. Thinner white wire with black stripe is ground.
Thicker green wire is 12v. Thinner white wire with black stripe is ground.
0 2020/12/21 17:10:04
I used the thicker ground wire in the harness, NOT the thinner one in the window switch harness.
I used the thicker ground wire in the harness, NOT the thinner one in the window switch harness.
0 2020/12/21 17:10:06
I used the same white wire with black stripe that is ground, but slightly further down the window harness.
I used the same white wire with black stripe that is ground, but slightly further down the window harness.
0 2020/12/21 17:10:07
0 2020/12/21 17:10:09
0 2020/12/21 17:10:12
Stock fender molding
Stock fender molding
0 2020/12/23 15:32:06
Stock fender molding
Stock fender molding
0 2020/12/23 15:32:08
JDM rcf rear moldings
JDM rcf rear moldings
0 2020/12/23 15:32:10
test fit
test fit
0 2020/12/23 15:32:12
Test fit but you can still see the black stock piece underneath. That goes away with these.
Test fit but you can still see the black stock piece underneath. That goes away with these.
0 2020/12/23 15:32:14
0 2020/12/24 18:32:26
0 2020/12/24 18:32:30
0 2020/12/24 18:32:33
The white wire with black stripe is Ground.
The white wire with black stripe is Ground.
0 2020/12/25 15:24:37
The thicker green wire on the side of the connector is 12v + when the headlights are turned on.
The thicker green wire on the side of the connector is 12v + when the headlights are turned on.
0 2020/12/25 15:24:39
I used the thicker ground wire futher down in the harness because I did NOT want to tap into the tiny ground wire. In this picture you can see my attached pink wire which is part of the ambient lighting connector.
I used the thicker ground wire futher down in the harness because I did NOT want to tap into the tiny ground wire. In this picture you can see my attached pink wire which is part of the ambient lighting connector.
0 2020/12/25 15:24:41
That black stuff on the wire is something new I tried via liquid electrical tape. I love it. Will be using this again in the future.
That black stuff on the wire is something new I tried via liquid electrical tape. I love it. Will be using this again in the future.
0 2020/12/25 15:24:42
0 2020/12/25 17:27:54
0 2020/12/25 17:28:01
0 2020/12/25 17:28:06
0 2020/12/25 17:28:12
0 2020/12/25 17:28:17