ClubLexus - Lexus Forum Discussion
Share Your Pictures with Our Community. Upload Now
0 2019/07/17 10:05:35
0 2019/07/17 10:05:04
0 2019/07/17 10:04:38
0 2019/07/17 10:04:10
0 2019/07/17 10:03:57
0 2019/07/17 09:55:02
0 2019/07/17 09:54:54
0 2019/07/17 09:54:47
0 2019/07/17 09:54:35
0 2019/07/17 09:54:30
0 2019/07/17 09:54:26
0 2019/07/17 09:54:22
Advertisement
0 2019/07/17 09:54:17
0 2019/07/17 09:32:53
Zip ties from "running board-to-frame bracket" on left forward to my inner fenderwell bolt (not visible). Notice how body mount on right of pic angles forward the more lateral/"up" it is. This is one reason why negative offset wheels and wheel spacers create more rub with much larger tires. The other is design of inner fenderwell has less space as it reaches laterally to metal fender.
Zip ties from "running board-to-frame bracket" on left forward to my inner fenderwell bolt (not visible). Notice how body mount on right of pic angles forward the more lateral/"up" it is. This is one reason why negative offset wheels and wheel spacers create more rub with much larger tires. The other is design of inner fenderwell has less space as it reaches laterally to metal fender.
0 2019/07/17 09:21:12
The running board to frame bracket that is the attachment point for everything to be pulled towards. Maybe a little over a foot from the screw. I recommend thicker, longer zip ties.
The running board to frame bracket that is the attachment point for everything to be pulled towards. Maybe a little over a foot from the screw. I recommend thicker, longer zip ties.
0 2019/07/17 09:09:44
0 2019/07/17 09:07:09
Tightened up with wing nut. Zip tie to be pulled back, giving more clearance
Tightened up with wing nut. Zip tie to be pulled back, giving more clearance
0 2019/07/17 09:07:00
0 2019/07/17 08:57:59
Driver side, rear of front fender well. Large-face Silver bolt with rubber washer replaces the factory screw and its plastic recessed thread assembly. This is before being pulled back from the inside.
Driver side, rear of front fender well. Large-face Silver bolt with rubber washer replaces the factory screw and its plastic recessed thread assembly. This is before being pulled back from the inside.
0 2019/07/17 08:51:29
0 2019/07/17 08:41:51
0 2019/07/17 08:38:41
Before mod. These are the 3 fittings that connect passenger front bumper to the front/inner fenderwell. Center one with thick rubber washer is a bolt, the other two are screws. The left one is the outermost, the right one is innermost and least visible. As seen from in front and beneath vehicle
Before mod. These are the 3 fittings that connect passenger front bumper to the front/inner fenderwell. Center one with thick rubber washer is a bolt, the other two are screws. The left one is the outermost, the right one is innermost and least visible. As seen from in front and beneath vehicle
0 2019/07/17 08:29:29
NIA Splitter Kit
NIA Splitter Kit
0 2019/07/17 08:28:50
NIA Side skirts
NIA Side skirts
0 2019/07/17 08:28:46
NIA Rear spats
NIA Rear spats
0 2019/07/17 08:28:44
NIA Splitter
NIA Splitter
0 2019/07/17 08:28:41
0 2019/07/17 08:23:57
0 2019/07/17 08:23:44
0 2019/07/17 08:21:58
0 2019/07/17 08:21:53
0 2019/07/17 08:21:49
Advertisement