LS430 MRR HR2's for Sale 18 x 9's
#1
Driver
Thread Starter
Join Date: Jan 2007
Location: VA
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
LS430 MRR HR2's for Sale 18 x 9's
Had these on my '01 LS430 for about 4 months, before selling the vehicle - now they're sitting in the garage collecting dust.
Wheels: MRR HR2's 18 x 9 Titanium Finish
Tires: Toyo Proxes 4, 245/45/18
Tires and wheels have about 2,000 miles on them. 3 wheels are in excellent condition. The 4th has a decent curb rash, but is still in balance and can be touched up. Pictures of curb rash to follow tomorrow (too dark and rainy to mess with it tonight!).
These cleared the rear just fine, although I used a thin spacer in the front to clear the BBS. Spacers will be included if desired.
I paid $1,700 for these new. $500.00 shipped CONUS gets 'em! This is a DEAL - I just want them out of my garage to make room for my next project.
The rash shown on the spoke is not as bad as it appears, nor are the ones on the edge. I hit them with a dremel to smooth them out. A little touch up paint and clear coat - and they'll barely be noticeable.
I have received several questions about the offset. To my knowledge, MRR does not list the offset for their wheels. They fit my LS430 fine with 5mm spacers (included). I added 5mm to the rear to bring the wheels out a little, but not needed. Again, all spacers and lugs are included.
Wheels: MRR HR2's 18 x 9 Titanium Finish
Tires: Toyo Proxes 4, 245/45/18
Tires and wheels have about 2,000 miles on them. 3 wheels are in excellent condition. The 4th has a decent curb rash, but is still in balance and can be touched up. Pictures of curb rash to follow tomorrow (too dark and rainy to mess with it tonight!).
These cleared the rear just fine, although I used a thin spacer in the front to clear the BBS. Spacers will be included if desired.
I paid $1,700 for these new. $500.00 shipped CONUS gets 'em! This is a DEAL - I just want them out of my garage to make room for my next project.
The rash shown on the spoke is not as bad as it appears, nor are the ones on the edge. I hit them with a dremel to smooth them out. A little touch up paint and clear coat - and they'll barely be noticeable.
I have received several questions about the offset. To my knowledge, MRR does not list the offset for their wheels. They fit my LS430 fine with 5mm spacers (included). I added 5mm to the rear to bring the wheels out a little, but not needed. Again, all spacers and lugs are included.
Last edited by OBXTucker; 07-29-08 at 07:09 PM. Reason: price change
#4
Driver
Thread Starter
Join Date: Jan 2007
Location: VA
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
5 mm spacers, I don't know the offset - these came from D2 Autosport, so Derrick may be able to shed some light. If I recall, MRR doesn't list offsets. I'll post pics later tonight of all wheels in their current condition.
#7
Driver
Thread Starter
Join Date: Jan 2007
Location: VA
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
PureDrifter: These will not clear the front big brakes without the spacer. They miss clearing by about 2mm's. MRR had spec'd these to fit, but apparently missed slightly on the offset (according to D2). All in all, very nice wheels and tires - but yes - you'll need the spacers to fit LS models.
Last edited by OBXTucker; 10-28-07 at 07:46 PM.
Trending Topics
#12
Lexus Champion
iTrader: (1)
If the original poster doesnt mind, since I have the same exact wheels in the same size and finish that I bought from Derrick on my 2000 GS400...YES they fit with no problem. The offset should be +35 Matter of fact I have 20mm spacers on the rears and they still fit just fine. I'll be putting up some new pics soon .
OBXTrucker- look on the inside of one of the spokes. There should be two stamps in the metal on the inside, one that indicates wheel size prob (18x9J), and the offset (+35) This is pretty much standard for every set of aftermarket wheels I have ever owned.
Good luck with the sale.
Eric
OBXTrucker- look on the inside of one of the spokes. There should be two stamps in the metal on the inside, one that indicates wheel size prob (18x9J), and the offset (+35) This is pretty much standard for every set of aftermarket wheels I have ever owned.
Good luck with the sale.
Eric
#13
Driver
Thread Starter
Join Date: Jan 2007
Location: VA
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Ebruce2!
I'll take a look this evening and post more details on the offset.
And yes, that's my yellow lab in the foreground. Great companion....and keeping my feet warm as I type right now!
I'll take a look this evening and post more details on the offset.
And yes, that's my yellow lab in the foreground. Great companion....and keeping my feet warm as I type right now!
#14
Former Sponsor
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
If anyone need input on these wheels or a 2nd opinion you can feel free to contact me as a reference.
sales@d2autosport.com
877-361-0296 ext 5
sales@d2autosport.com
877-361-0296 ext 5