When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Where did you guys put the air line through in the trunk? Did you guys drill holes? And swtjlsy, can you explain how the lines will melt? Sorry I'm new to all of this lol
I drilled holes for the rears. Drilled right through fender wells into trunk. I ran the fronts through yhe firewall into the cab, and ran them into the trunk. Yes, the lines coming out of vu4 will eventually melt from the hot compressor lines.
Where did you guys put the air line through in the trunk? Did you guys drill holes? And swtjlsy, can you explain how the lines will melt? Sorry I'm new to all of this lol
the compressors leader hoses get very hot and you have them routed right on top of your soft lines which over time will melt though them and make a leak. it a easy fix just run the lines the other way turn them 180 degrees the other way
All you guys are probably gonna start crying from laughter, but here goes!
Just finished wiring it up today - took a week and two days to complete (WAY TOO LONG but I lacked the proper tools - also, installed a new head unit). In its final form though (which will probably come around in 6 or so months), expect to see some lights, hardwood flooring and plexiglas.
Thought I would add my trunk build into the thread I just finished it up. The entire enclosure inside is wrapped with suede, has push and pull fans and adjustable LED lighting. All the components are under 1/2" plexiglass. I built it into the spare tire well so I could still use my trunk and keep everything easily serviceable.
I just finished it up. The entire enclosure inside is wrapped with suede, has push and pull fans and adjustable LED lighting. All the components are under 1/2" plexiglass. I built it into the spare tire well so I could still use my trunk and keep everything easily serviceable.
