What to do with fender liner, when slammed?

Subscribe
Mar 22, 2008 | 12:19 PM
  #16  
Quote: I was told the 2GS has no harnesses in the danger zone.

good to know.
Reply 0
Mar 22, 2008 | 01:47 PM
  #17  
There IS a harness in the drivers side fender well, as well as the hood cable. It's tucked away, but should be ziptied just in case.

I sliced my fender liner just above the bolt in the middle of the fender on the 2gs. left the part to cover up most of the front, and the rear of the fender well. The whole top is gone though.
Reply 0
Mar 24, 2008 | 09:45 PM
  #18  
Quote: You can just unplug it from the main connector and re route it instead of splicing all those wires. Unless your harness is all chewed up

I started unplugging from the inside, but damn there are small plugs I cannot get my big paws on!!!


Anyone have pics of their wire tuck?
Reply 0
Mar 30, 2008 | 04:23 PM
  #19  
Milt i jsut did this today. no cuting no unplugging.



yes theres alot of zip ties but if one breaks the other is there to still keep the harness up. its all just extra safety .
Reply 0
Subscribe