ThinlaneT
Thread Starter
GS - 3rd Gen (2006-2011) / Suspension Today 11:46 PM
Hi all,
I’m considering coilovers as replacement for my oem struts and springs. Overall good reviews in KW, although they are only available for the 2006-2012 IS250. Funny how my GS300 and the...
JOCAM
Thread Starter
ES Models / ES - 7th Gen (2019-2025) Today 11:35 PM
Denzlex
“Meat”? Another typo? Have you considered proofreading? 😉
RX Models / RX - 1st Gen (1999-2003) Today 11:19 PM
martin0820
Looking for opinions...
I have a 1999 RX 300 with 63,000 miles. It's in mint condition, and I have no plans to ever sell it.
Given that it has plastic radiator parts, should I consider preemptively...
Mykolas2k
Thread Starter
LS Models / LS - 1st and 2nd Gen (1990-2000) Today 11:03 PM
Yamae
Thanks for the update.
The idling rpm should be 750rpm sharp when parked. If it is higher than that, it will simply mean that the TPS is not properly adjusted. You definitely need to calibrate it.
SoilTheCadaver
Thread Starter
LS Models / LS - 3rd Gen (2001-2006) Today 10:57 PM
Been dealing with the headlight leveling warning on my 2002 ls430 for a while and it’s starting to bother me now.
i noticed one of the rear sensor brackets for it is bent on the trailing arm too....
Gogoup
Thread Starter
ES Models / ES - 1st to 6th Gen (1990-2018) Today 10:48 PM
Hello,
My 2013 ES300h's both fog lights stops working. Not sure when the problem started, I only found it out today.
The fog light's green light on the instrument cluster still illuminated, but...
General Forums / Car Chat Today 10:45 PM
Stroock639
the first gen looked a little 1980s lol the project entered development in 1983
General Forums / Car Chat Today 10:38 PM
mmarshall
I see a number of big 3-row SUVS like Escalades, Expeditions, Yukons, etc....running around this area with one or two people in them at most. I think (and this gets back to what some...
InfraGhost_500
Thread Starter
IS Models / IS 500 (2022-2025) Today 09:52 PM
No cracks at all radiating from the spot. See you also tomorrow!
AnchorUp1893
Thread Starter
IS Models / IS F (2008-2014) Today 09:50 PM
This did not work. I installed four M8 washers on each of the four mounting bolts and the support beam did not mount up. Not enough clearance between the midpipe and beam with four washer stacked up.