rotors only
#1
Racer
Thread Starter
rotors only
so over the past year, I had had to have my rotors turned twice once when I replaced the pads a year ago, and then it was about six months down the road the rotors wore again, so I had front break vibrations and shakes
I then had them turned again, and now they are bad five months latter.
So I think its at the point possibly where its just that they have been turned to much and they just keep getting weaker and this is why the vibration keeps coming back.
I have 7-8 mm left on my pads, and I would hate to have to waste money and buy new pads also
I currently have my Akebono proact pads which are like 100 dollar pads I only paid like 40 bucks for them but still don't want to waste money.
I am going to replace just the rotors getting OE style replacement from EBC brake rotors but
iwillIrun into problems using my current pads ?
are the pads what probably keep hvaing my rotors go since i had the rotors turned but cintinued to use the pads that where already used on the worn rotors ?
I then had them turned again, and now they are bad five months latter.
So I think its at the point possibly where its just that they have been turned to much and they just keep getting weaker and this is why the vibration keeps coming back.
I have 7-8 mm left on my pads, and I would hate to have to waste money and buy new pads also
I currently have my Akebono proact pads which are like 100 dollar pads I only paid like 40 bucks for them but still don't want to waste money.
I am going to replace just the rotors getting OE style replacement from EBC brake rotors but
iwillIrun into problems using my current pads ?
are the pads what probably keep hvaing my rotors go since i had the rotors turned but cintinued to use the pads that where already used on the worn rotors ?
#3
Racer
Thread Starter
this is why I am going to get new rotors.
But i just want to make sure that its going to be ok putting the new Rotors on with the old pads because the old pads are in really great shape with like 8mm left on them I don't want to throw away pads and waste money if I don't have to so using new rotors on the old pads are fine ?
Thread
Thread Starter
Forum
Replies
Last Post
silver305
LS - 4th Gen (2007-2017)
30
12-21-14 11:38 AM
McMuffin
ES - 1st to 4th Gen (1990-2006)
7
10-10-08 11:12 AM