Done!!! Sways and springs awd
Nice catch Mike,
DJ in this pic you will notice that the bottom of the spring sits snug into that plate but that plate (for lack of a better technical term) isn't sitting in the groove of the main plate of the strut(look just to the left of the spring). I also don't know what damage can be caused by this but know that when I installed my NF instructions stated to make sure it sat in that groove. Maybe someone else more knowledgeable than me can elaborate (i apologize).
Looks good though, good job
Lead Lap
Joined: Sep 2008
Posts: 3,706
Likes: 234
From: #BBNine
yeah, that's a good catch on the spring problem. you just saved him a lot of headaches probably.
car looks great DJ! I'll probably be doing the same mods and it's good to have other people and their experience.
car looks great DJ! I'll probably be doing the same mods and it's good to have other people and their experience.
Sweet. Shouldn't be the same since I'm rwd. But thanks for the heads up. Glad they work for awd.
Look at the pic where there is a gap on the bottom. The springs supposed to be up against that to prevent the spring from turning.
I'm on my phone or I would copy the pic. Someone should be able to point it out.
Look at the pic where there is a gap on the bottom. The springs supposed to be up against that to prevent the spring from turning.
I'm on my phone or I would copy the pic. Someone should be able to point it out.
Lexus Fanatic
Joined: Sep 2007
Posts: 22,608
Likes: 105
From: Waiting for next track day
congrats man. I have the sway bars and are loving them. I am into the F sport stuff. I need to finally make time to get down to the dealership to order my intake and shift ****
Thread Starter
Driver
Joined: Jan 2003
Posts: 169
Likes: 0
From: PA
Congrats as well!
