Godspeed upper control arm install problem

Reply Subscribe

Thread Tools

Search this Thread

Feb 25, 2019 | 09:27 AM

Graves250

Thread Starter

Driver School Candidate

Joined: Feb 2019

Posts: 2

Likes: 0

From: Az

Godspeed upper control arm install problem

I'm trying to install godspeed upper control arms, they seem to be more narrow and I cant get them to slide in. Anyone else have this issue?

Feb 25, 2019 | 09:40 AM

Graves250

Thread Starter

Driver School Candidate

Joined: Feb 2019

Posts: 2

Likes: 0

From: Az

here is what the issue is, they are hitting the brackets, I cant wiggle or pound them I

Feb 25, 2019 | 08:21 PM

primavera

Racer

Joined: Feb 2017

Posts: 1,269

Likes: 331

From: Ontario

I would try to shave the bushings a bit on one or both sides, that might give you just enough room to slide them in. Also your rubber boot is due for replacement.

Feb 27, 2019 | 10:57 AM

Gville350

Moderator

iTrader: (10)

Joined: Mar 2011

Posts: 11,576

Likes: 444

From: South Carolina

I agree, shaving the metal portion of the bushings to odd to get them to fit. Be careful not to damage the rubber portion of the bushing though.

OR...you can contact the seller.