New here, need help with LSD 2001 IS300
I need to get the piece that slides into the differential that allows the axles to connect to the differential. I also have an open diff and those came out fairly easy but I can’t figure out how to take them out on the LSD differential. I’m using the same method as I did when taking those pieces out on the open diff and made sure to stop hammering once I figured they aren’t coming. Some help on how to do it would be nice cause I can’t find any information online except for on an open diff. |
Originally Posted by ThatBlueIS
(Post 10405153)
I need to get the piece that slides into the differential that allows the axles to connect to the differential. I also have an open diff and those came out fairly easy but I can’t figure out how to take them out on the LSD differential. I’m using the same method as I did when taking those pieces out on the open diff and made sure to stop hammering once I figured they aren’t coming. Some help on how to do it would be nice cause I can’t find any information online except for on an open diff. was the LSD pulled from a wrecked car? should the shafts be slightly tweaked making it harder to pop out? |
They are the same shafts and removal method for both open and LSD for sure.
Good luck. Jeff |
Those pieces are held in place by a small c clip. Pop off the 2 c clips inside of the diff and the stubs should come off
|
All times are GMT -7. The time now is 09:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands