Help! Caliper clearance
Thread Starter
Pole Position
Joined: Feb 2014
Posts: 208
Likes: 9
From: california
Help! Caliper clearance
Just bought these some new wheels and the fronts don't clear the calipers on my '16 is350 Fsport tried on 10mm spacer and still no and I feel any bigger of a space will be too aggressive. Wheel specs in the front are 19x8.5 + 36 but I made the mistake of selecting the Face2 variation of the wheels for the fwhich are more concave designed so the inner part of the wheel spokes where they start to dip in makes contact with the caliper. I had this idea that if I got a BBK so that the calipers would be further out due to larger disk diameter..they would clear cause it'd be under the part of the wheel that isn't as caved in. Any other suggestions would be immensely appreciated!
The wheels are the Gramlights 57ANA
The wheels are the Gramlights 57ANA
Driver
Joined: May 2017
Posts: 109
Likes: 9
From: AZ
In my experience with previous vehicles, your only option is to run a spacer. I've seen guys shave calipers down... but I personally would never recommend that. I've also seen guys machine the wheel down... also something I personally would not recommend. But, I have seen both done. Nice wheels though!
Pole Position
Joined: Oct 2016
Posts: 306
Likes: 40
From: Ca
I could be wrong but I think this might be a problem because of the spoke design since you said even a 10mm spacer didn't work. I also got 19x8.5 wheels +35 in the front which look a little more concave in the front than yours but a small 3mm spacer was able to fix my problem of caliper clearance
Thread
Thread Starter
Forum
Replies
Last Post
Grouchy
LS - 4th Gen (2007-2017)
32
May 25, 2013 07:46 PM
Low Life
IS - 2nd Gen (2006-2013)
34
Nov 25, 2012 02:07 PM
Virulent
IS - 2nd Gen (2006-2013)
1
Apr 15, 2012 02:18 PM