For people running rsr's super downs are you able to get your rear toe in spec? I know FIG Engineering now makes the rear camber kits but not sure if toe has been an issue. Thanks for any info.

 

Yes you are able to get your toe in spec. Everything was able to adjust except rear camber.

 

What did the read camber came out to be?

 

There should be no problem to get toe back to spec, ive done one in the past and the customer had no problems!

 

Toe will be fine. Just FYI my rear camber was -2.0 and -2.2 in the rear and I'm lowered 1inch. That's very similar to RSR down specs. The max spec on the rear is -2.3, so I'm sure that the super downs will push your rear out of spec. I did just install some SPC camber arms though and just had my car aligned. He set my rears at -1.4 on both sides. Easy install if you have your rear springs out. Toe will be fine but if you're worried about tire wear slap some camber arms on there.

 

Yea I def plan on getting a camber kit. I didn't know spc made a kit for the 3is yet. good to know