full suspension sc300 build
Trending Topics
#10
Lexus Champion
iTrader: (6)
Than again..... And Again..... And again...... please,
Cuz this is gonna' be GOOD!
(that first pic is straight up "Build ****".)
Last edited by Studiogeek; 06-04-13 at 05:22 AM.
#14
Driver
Thread Starter
Join Date: Nov 2011
Location: ca
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
yah alot of time and $ for sure, thankz for replys nice to see good feed back car hasnt left the block so nobody has seen it but you guys, ive been wrkng on this 2 years now, yes i have rear sway bar, and the control arms were 600$ i think battle version uppers , and to my knowledge i installed them correctly there is a offset persay on them u can look at them and see 1 side sloes dwn a bit anything is possibale i am human but ride perfect, as far as brake lines idk just havnt had time to get braded lines i guess whith everythng i was focused on i forgot??? but everythng in time im glad u pointed it out something to think about for future
#15
Driver
Thread Starter
Join Date: Nov 2011
Location: ca
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
the 1 thing i did do was hunt down a sc400 that had the extra bracket for rigidity on sub frame most sc's dont have , and what sucked was i thought oh i can just bolt them on but NO !!! I NEEDED the front REAR SUBFRAME also, and the lower control arm bolts cause those r differnt also. obviouslt the challange was time, u gota drop both sub frames, rack and pinion, all the suspension, took me 3 weeks just to do the front, the rear end took me about 1 week to assemble on a stand after paint, parts measerments, exc exc but it was worth it because u can eat off my car lol i wanted to do something differnt something that when people see it they knw i did some work because nobody does this, ither taks too much time or is rather dificult, and the $$$$ is always a factor also, i didnt buy all that at once hahah no i bought paycheack by paycheak and little by little