GS300ToM

iTrader: (32)

Hopefully this should solve my problem lol, my tires are gettin feathered like crazy makin hella tire noise... Hopefully after this week when i get my alignment i should be koo for the drive to Socal @ da end of the month. As of right now, i've installed everything myself and took me about 4 hrs.. was a piece of cake.. kinda struggle with the rears but i manage to get it in. My toe right now is hella crooked, GLEN was right... DO NOT DRIVE IT ANYWHERE except to da alignment shop lol shiet looks hella crazy.... luckly theres a alignment shop 2 mile from my house. ill snap some pics later!!!

Specs as of now is

25" front fender
25.2 rear fender

ill add camber n toe later

phillygs3

iTrader: (5)

Nice , pm me some pics when you get a chance Tom

LEXUS_KID

iTrader: (4)

Are these from Carson's

17gs400

i think those are from Exact motorsports.

one of the piece said Exct on it

GS300ToM

iTrader: (32)

Ill get some pics tomorrow... And yes these are from exact

whazzzzuup

iTrader: (11)

How much more did it lower in the front? Parts look good, Tom!

GS300ToM

iTrader: (32)

i would say bout close to an inch... here's some pics at where it stands all **** eyed













we'll see how the specs turn out tomorrow...

handoverfi

iTrader: (7)

Those are coo but damn they throw the toe off completely hahah so what will you do when you have to chunk the stock wheels back on ??? I dont think you can drive around with the stonkies on..

GS300ToM

iTrader: (32)

what do u mean????

5t341th

iTrader: (16)

u can eyeball ur own alignment for now. i've set my toe by eyeballin and i got it pretty close to stock when i aligned it

chrispy

iTrader: (21)

When your car is lowered a lot, the toe cannot be corrected to factory spec. After adding the RCAs, my toe was able to be corrected to factory spec again. I'm using the AutoFashion SS kits.

chrispy

iTrader: (21)

By the way, to anyone with 16" wheels, the front RCA will not work. You will need a 17" wheel or larger or one of the castle nuts will scrape the inside of the rim. So if your spare wheel is a 16", be careful of that.

handoverfi

iTrader: (7)

Read the exact website and do a search some people who tried to use the stock 16s with the front RCA kit got the whole inside of the rim rubbed by the front RCA and the website says yiu must have a 17" rim or bigger to run these. But if you got stock 17s I think you will be good

GS300ToM

iTrader: (32)

yeah i read n did my homework before spendin $500 buks lol but yeah its good for people who dont know now they do... btw i do got stock 17s... 5 to be exact

[ant]

keen to see aligned specs n pics, i would like a front SS kit. but i have stock 16s so id need to buy some cheap stock-spec 17s :/