IS F front rotors
#122
Lexus Fanatic
Thread Starter
I'm not sure how group buys work on the forum. But I can find out how much Opus water jetting would charge us per set if we order in bulk..Listen guys this is by far the cheapest six piston BBK anywhere .The rotors are 100.00-110.00 on Ebay. The calibers can be purchased from a local Chevy dealer for 269-319.00 each. I bought the pads from Ebay for 58.00 dollars landed... And the brackets are 90.00 dollars for the pair( I/2 inch steel ). A 14.1 rotor / 6 piston calibers setup for under a grand..
Thanks , the brakes are made by an Australian company PBR. As a joke for the locals, I'm going to make sticks that say( Bembo ).. So that when they correct me . I then can tell them , that"s why they were so cheap on Ebay ..lol
Thanks , the brakes are made by an Australian company PBR. As a joke for the locals, I'm going to make sticks that say( Bembo ).. So that when they correct me . I then can tell them , that"s why they were so cheap on Ebay ..lol
The following users liked this post:
GhostDog88 (04-19-17)
#123
Lexus Champion
iTrader: (21)
Man thats bad a$$ thanks for the thread. Dont let this group buy thing get out of hand. CL will kill your thread. If you do try to get the brackets to people, do it on the down low. I was told tonight that I cant sell anymore of my Rear Strut Tower Bars on CL, unless I become a vendor. Oh and Im not trying to be a *ick but its (CALIPER) not (caliber).
Last edited by spdrcr771; 06-10-10 at 11:46 AM.
#125
Lexus Fanatic
Thread Starter
Man that bad a$$ thanks for the thread. Dont let this group buy thing get out of hand. CL will kill your thread. If you do try to get the brackets to people, do it on the down low. I was told tonight that I cant sell anymore of my Rear Strut Tower Bars on CL, unless I become a vendor. Oh and Im not trying to be a *ick but its (CALIPER) not (caliber).
Wow I do have a slight case of dislexus I mean (DYSLEXIA).. Anyhow thanks. I've always confused the two, I guess I was trying show the caliber of my mod..
#126
Great idea for a bbk i would have never thought about it. What yr vette calipers did you use? I'll have to pass this along to some of the turbo sc guys.
Last edited by slvrboolet; 06-10-10 at 09:58 AM.
#127
They are C6 Vette calipers I don't think they vary by model year. Dude, I must say this is one of the coolest mods I've seen, great job thinking outside the box. Only question I have is what about the brake balance? I've heard a lot of problems when upgrading the front brakes alone, when dealing with brake balance. The front brakes are now so much more powerful than the rears and it upsets the balance. If I'm not mistaken you can adjust the brake bias but I don't remember how. Have you done this? Can anyone chime in on this?
#129
They are C6 Vette calipers I don't think they vary by model year. Dude, I must say this is one of the coolest mods I've seen, great job thinking outside the box. Only question I have is what about the brake balance? I've heard a lot of problems when upgrading the front brakes alone, when dealing with brake balance. The front brakes are now so much more powerful than the rears and it upsets the balance. If I'm not mistaken you can adjust the brake bias but I don't remember how. Have you done this? Can anyone chime in on this?
#130
Lexus Fanatic
Thread Starter
Ft. Liquor dale
I dont have an sc YET. But i have a turbo IS300 with the bbk up front and was deffinatly one of the best mods i have done the braking power is insane. I did fronts only as the rears only account for about 20% anyway i havent noticed any neg effects of having fronts only.
So far I have not experienced any side effect of having bbk fronts only . I do have the Z06 4 piston rears which requires at least a 13.2 inch rotor. I will be using the Supra TT's which are 13 inch. I just have to float the caliper 5 mm .
Thanks everyone . I'm glad to see such a positive response for this mod.
#132
Lexus Fanatic
Thread Starter
The brakes feel awesome.
I drove the car this weekend . And I will say the brakes feel very strong. There is more of a nose drive when I stand on the brakes. However I'm still running the one piston OE SC calipers . I'm gonna be installing two different brake upgrades this week. A set of TT's fronts only and my LS's on a friends car. I'm planning to get all three cars together. And do a side by side comparison, hopefully the weather permits .. I would like nothing more then to resolve the debate. I know for a fact that the Z06's have out preformed the Ls's . But in all fairness I didn't have cross drilled LS rotors.
Oh some other interesting information . After installing Z06 calipers I realized I had more wheel clearance . The thickness of the PBR (z06) calipers are a 1/4 thinner. And the other info is the 4 piston rear calipers share the same mounting location. Which means the some bracket can be used for either the 6 or 4 piston calipers in the front.
Oh some other interesting information . After installing Z06 calipers I realized I had more wheel clearance . The thickness of the PBR (z06) calipers are a 1/4 thinner. And the other info is the 4 piston rear calipers share the same mounting location. Which means the some bracket can be used for either the 6 or 4 piston calipers in the front.
#134