Pics: 2000 GS400: After Brakes and Suspension Work.
#1
Pics: 2000 GS400: After Brakes and Suspension Work.
Got my suspension installed today. The drop in the rear is nice, the fronts didn't seem to drop much imo. It's supposed to drop 1.8 in front and 1.2 in rear.
Future Plans:
- TRD Sways
- SRT Intake
- Exhaust
Brakes:
- Supra TT Calipers
- Hawks HPS Pads
- Brembo Cross Drilled Rotors
Suspension:
- L-Tuned Shocks
- Espelir Springs
- TRD Front STB
- Lextasy Rear STB
Brakes:
STB's:
Before Drop:
After Drop:
Future Plans:
- TRD Sways
- SRT Intake
- Exhaust
Brakes:
- Supra TT Calipers
- Hawks HPS Pads
- Brembo Cross Drilled Rotors
Suspension:
- L-Tuned Shocks
- Espelir Springs
- TRD Front STB
- Lextasy Rear STB
Brakes:
STB's:
Before Drop:
After Drop:
#3
I actually took the centercaps off after the suspension was installed. It looks ugly (because all the hardware behind it was exposed). The Lexus centercaps are bigger than the Infiniti centercaps, so it doesn't work.
They sell blank centercaps on eBay for $40, but I don't wanna spend that kinda money, lol. So I'm keeping it the way it is.
- L-Tuned Shocks
- Espelir Springs
I guess that's as stock as you can be (stiffness), but it just drops it an inch or so.
They sell blank centercaps on eBay for $40, but I don't wanna spend that kinda money, lol. So I'm keeping it the way it is.
- L-Tuned Shocks
- Espelir Springs
I guess that's as stock as you can be (stiffness), but it just drops it an inch or so.
#5
Lexus Test Driver
Join Date: Aug 2006
Location: MA
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
The drop is perfect in my opinion, looks great!
How's the ride? I'm trying to figure out a suspension setup that is as close to stock as possible while still being lower and slightly rigid - just to get the "float" out of the steering.
How's the ride? I'm trying to figure out a suspension setup that is as close to stock as possible while still being lower and slightly rigid - just to get the "float" out of the steering.
#6
Quality ride is the same as stock, *****, but it is lower.
Trending Topics
#13
Lexus Fanatic
iTrader: (1)
Hey you should really shave the infiniti logos off the centercaps
It's not hard at all. It will cost you about $10 or so and a little bit of elbow grease. Just get a can of bondo, some sandpaper, and a can of paint. Thats what I did for mine and it took about 30 minutes
It's not hard at all. It will cost you about $10 or so and a little bit of elbow grease. Just get a can of bondo, some sandpaper, and a can of paint. Thats what I did for mine and it took about 30 minutes