ShaneC

i have close to an inch all round left to lower. but i wanted to know if it is safe for the coilovers if i lower all the way? i dont want to damage anything in the coilovers.

Adam2562

iTrader: (2)

i juts lowered mine all the way down in the front and left maybe 4 threads in the rear... soo far soo good but i just installed it this morning

GS300Rich

I have just a few threads front and rear, and thought I read somewhere that you arent supposed to go down past the last few threads.

ShaneC

i am thinking about buying some other coilovers that will allow me to go lower. but i guess i will lower the CS to somewhere close to the last thread and see how that looks and see if i am happy with that.

thanks guys

j stuff

iTrader: (5)

u guys got pics of your lowering?

rgarjr

iTrader: (1)

I dont think it would hurt the coilover if you run them all the way down. I have them around 3 threads left.

benzo555

iTrader: (11)

Do you guys have camber issues??

ShaneC

heres to pics of my car. still can go about an inch lower all around.





and for camber.. from what i remeber i have -1.9s for the rear. and fronts are not too bad at all.

rominl

iTrader: (4)

most definitely we have camber, but it's all about alignment. if the shop does a good job, the toe can compensate the camber

my car is quite low in the front (to the limit) already, and the rear has couple of threads to go i think. last weekend i helped my friend to lowered his tein cs pretty much to teh lowest as well

i think as long as you lock the rings tight it should be fine