dobinson front and rear shock/strut bushing order
#1
Intermediate
Thread Starter
dobinson front and rear shock/strut bushing order
On the front strut it comes with washer, bushing, washer, bushing, washer, nut. The top mount I bought has a bushing underneath that goes through the top. I saw a diagram on the dobinson website but I'm still confused, if I understand correctly. It looks like washer, bushing from strut, washer, bushing from top mount, top mount then bushing from strut, then washer and nut. If that is correct, that essentially means two bushings underneath of the top mount. Or, do I actually remove the bushing from the bottom bushing from the strut and do washer, top mount bushing, then top mount, then bushing and washer?
How does rear order go?
How does rear order go?
#2
Lead Lap
We need a picture or a link to the setup you bought. Can’t picture what you are referring to in my head.
The following users liked this post:
FrankT (03-25-19)
#6
The following users liked this post:
Rygar470 (04-15-19)
Thread
Thread Starter
Forum
Replies
Last Post
OldLs400
LS - 1st and 2nd Gen (1990-2000)
3
08-19-18 02:19 PM
Clays93SC4
LS - 4th Gen (2007-2017)
0
07-13-18 07:56 PM
PlotPoint
LS - 1st and 2nd Gen (1990-2000)
20
10-23-14 09:08 AM