HI GS300 - Carson-Tuned B pipe
Thread Starter
Joined: Jul 2002
Posts: 9,859
Likes: 11
From: Waipahu, Waikele, HI
GS300 - Carson-Tuned B pipe
Carson-Tuned B pipe (jdm piece) - SOLD!!!
Shipping is $49 to the States (from Hawaii). Paypal fees apply, unless you do Paypal GIFT.
Fits the 2nd Gen GS300 (1998-2005).... aristo 2GS.
Carson-Tuned SS B-pipe for GS300..currently discontinued, but was sold on L-tunedparts.com for $500 back in the day.
The pipe is stainless steel. The pipe has two O2 sensor bungs. First bung is for the O2 sensor, the second O2 bung is for a "WideBand (a/f) sensor. Currently, the second O2 bung is closed off, I have a threaded bolt in there.
The pipe replaces the factory exhaust pipe with the third cat underneath the car. This pipe will only fit the GS300. You should see about 5rwhp with this exhaust pipe and should get a slightly deeper growl with your exhaust. You MAY need to purchase factory gaskets to use with the exhaust pipe, I used my existing ones as they were still good. Also, use the OEM bolts too….basically an easy direct swap.
Again, this is a JDM product and is not made in the states.
The brown marking is NOT rust/corrosion. Its the silver high-temp paint that turned brown due to the heat generated.
Pete
Shipping is $49 to the States (from Hawaii). Paypal fees apply, unless you do Paypal GIFT.
Fits the 2nd Gen GS300 (1998-2005).... aristo 2GS.
Carson-Tuned SS B-pipe for GS300..currently discontinued, but was sold on L-tunedparts.com for $500 back in the day.
The pipe is stainless steel. The pipe has two O2 sensor bungs. First bung is for the O2 sensor, the second O2 bung is for a "WideBand (a/f) sensor. Currently, the second O2 bung is closed off, I have a threaded bolt in there.
The pipe replaces the factory exhaust pipe with the third cat underneath the car. This pipe will only fit the GS300. You should see about 5rwhp with this exhaust pipe and should get a slightly deeper growl with your exhaust. You MAY need to purchase factory gaskets to use with the exhaust pipe, I used my existing ones as they were still good. Also, use the OEM bolts too….basically an easy direct swap.
Again, this is a JDM product and is not made in the states.
The brown marking is NOT rust/corrosion. Its the silver high-temp paint that turned brown due to the heat generated.
Pete
Last edited by PHML; Nov 14, 2013 at 05:31 PM.
Thread Starter
Joined: Jul 2002
Posts: 9,859
Likes: 11
From: Waipahu, Waikele, HI
The Carson-Tuned B pipe is quite heavy...weighs about 18 lbs...made of stainless steel. Shipping to the states is $49...via USPS Priority w/ Delivery confirmation number....3 business days to arrive to your door.
Thread Starter
Joined: Jul 2002
Posts: 9,859
Likes: 11
From: Waipahu, Waikele, HI
Trending Topics
Thread Starter
Joined: Jul 2002
Posts: 9,859
Likes: 11
From: Waipahu, Waikele, HI
No, sorry...I dont have any sound clips. I had headers and Blitz Nur Apec...axle back...and they sounded good. I had lots of compliments.
Thread Starter
Joined: Jul 2002
Posts: 9,859
Likes: 11
From: Waipahu, Waikele, HI
Thread
Thread Starter
Forum
Replies
Last Post
International GS300 Carson-Tuned B pipe (jdm piece)
hatteroo
2Gen GS430 / 400/ 300 Classifieds (98-05)
31
Mar 7, 2014 04:08 AM
LXOGOOD
2Gen GS430 / 400/ 300 Classifieds (98-05)
6
Feb 6, 2006 12:41 AM
