When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So no need to shave off the caliper or the tie rod? Direct fitment? Any pictures would be helpful
i think you have to grind the top of the tie rod bolt....or have front rca and no bolt grinding needed..... 10 min on the grind though... no big deal... there are several threads on it comparing them to supra brakes.....
it is a big deal, grinding them ISN'T the safe way to do this. the proper way to do it is a RCA from figs or sage or whoever else has RCA's
ive seen it done and its 1/8 inch off the stud that is plenty long enough.... to each his own.... i have sage rca on mine.... but still dont think its a big deal...TOTALLY nothing not safe
ive seen it done and its 1/8 inch off the stud that is plenty long enough.... to each his own.... i have sage rca on mine.... but still dont think its a big deal...TOTALLY nothing not safe
i have seen LOTS of things done that arent safe, just cause some people on here do it doesn't mean its ok....but your right, grinding down a piece of the nut that holds part of your suspension on is totally safe,i forgot.
i have the figs RCA though so its all good
GLWS, these calipers should go fairly quickly, pads included or no?
Payment sent..... Can't wait to get them on my SC400, now all that's left is spacers, bolts and rotors. going to order them as soon as I get the calipers in and painted.
@tither777, just got the calipers in today. They look great. I started preping them for paint. going to order the rotors, pads and spacers in a couple weeks. I'll be posting some pics as the progress goes on. When they came in, I felt like a little kid on Christmas morning. Can't wait to get them on. I will leave feedback on trader soon.
