What's up CL? I've got a professionally Chromed Intake Manifold with Powder Coated Throttle Body and Valve Covers. $500 package deal for the Valve Covers, Intake Manifold, and the Throttle Body.

The first pic shows how the parts look on the SC that they came off of..



Here are detailed pics of the parts.









Chromed NA Power Steering Reservoir.....$85




Siemens 720cc Low Impedance Injectors....$250

 

Are the injectors direct bolt in to the GE manifold and harness?

 

i have seen these parts first hand .. they are show quaility pieces .. buy with total confidence

 

Yes, the injectors are a direct bolt in to the GE manifold, you just have to change the injector plugs..

 

Since their low impedance, I assume, i'll need a resistor box as well..

but if you have the injector plugs avail, please PM me a price shipped for those to 60077.

Thanks.

 

Well, it depends on what ECU you're going to be using. The car that they came of is using a Haltech, which didn't require a Resistor box but if you're using the stock ECU then yes, a resistor box is required.

The plugs are on the car so you would have to source your own plugs. The plugs are nothing special, you could get them anywhere. They're the standard square plugs which will run you about $20.


PM Sent..

 

To the top......

 

Weekend Bump....

 

Weekend Bump...

 

To the top........

 

Weekend bump....

 

these parts are pretty i seen them numerous times in person...

 

i seen these parts first hand at a local meet and if i wasn't working on another project a would be all over these like semen on a hooker!!!

SUPER CLEAN AND THE VALVE COVERS ARE SERIOUS LOOK LIKE MARBLE!!!!!

 

Valvecovers and Power Steering Reservoir Sold!!

Throttle Body, Intake Manifold and Injectors still available..

Make some offers! Everything must go!!!

 

Weekend bump.....