When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Installed a 3” CarTreats midpipe yesterday. Long story short the OEM tunnel brace and middle support brace will not clear the midpipe. Are there any aftermarket options that clear cat back exhaust larger than 2.75”?
hey, wow I haven’t been on this forum for such a long time. Talk about bring this back from the grave 😂…. Actually what i ended up doing was getting washers and stacked them, one on top of each other until the cross bar was far enough that it wouldn’t rattle against the Midpipe. Hope this helps.
This did not work. I installed four M8 washers on each of the four mounting bolts and the support beam did not mount up. Not enough clearance between the midpipe and beam with four washer stacked up.
Ran into this issue too but wasn't in a position to buy an aftermarket one. So I just spaced it with spacers and longer bolts. Works a treat and no vibrant. Maybe when my money tree starts sprouting...
Ran into this issue too but wasn't in a position to buy an aftermarket one. So I just spaced it with spacers and longer bolts. Works a treat and no vibrant. Maybe when my money tree starts sprouting...
I will be making another trip to the hardware isle today. I found a F Sport brace for sale but she’s seen better days. Lots of scraps and marks of being on a lowered 2is.
Tunnel Brace Aftermarket Options?
