Pinout out for 02 sensor
#1
2nd gear
Thread Starter
Join Date: May 2024
Location: Iowa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Pinout out for 02 sensor
Howdy all,
I was wondering if anybody could take the time to pin out the harness side of 02 sensor bank 2 sensor 1. I noticed only 1 wire hanging on out of the connector and I for the life of me can't find a pinout to get them back into the connector in the right spots. I have as you might have guessed, an 03 GS300. I've got black/red stripe in the top left. Where do white, yellow and tan go?
Thanks in advance for your help!
I was wondering if anybody could take the time to pin out the harness side of 02 sensor bank 2 sensor 1. I noticed only 1 wire hanging on out of the connector and I for the life of me can't find a pinout to get them back into the connector in the right spots. I have as you might have guessed, an 03 GS300. I've got black/red stripe in the top left. Where do white, yellow and tan go?
Thanks in advance for your help!
Thread
Thread Starter
Forum
Replies
Last Post
fpoljanec
ES - 1st to 4th Gen (1990-2006)
0
06-08-17 03:07 AM