Aftermarket Wheel Owners Post Your Setup
F: 18x9 +30 235/40:18
R: 18x10 +38 275/35:18
Front bumper tab MOD, no fender rolling required
Lowered on: Stock Shocks + TEIN S-Tech Springs
Last edited by XhyDra; Mar 2, 2018 at 08:28 PM.
19 by 8.5 225/35/19 35 offset front
19 by 9.5 275/30/19 40 offset rear (I fitted a 35 offset and it rubbed on big dips - no fender rolling for me) (But damn did it look sexy lol)
Celebrating Lexus & Toyota from Around the Globe
Niche Citrine M161
Front: 19x8.5 +35, Bridgestone Potenza S-04 Pole Position 235/35/19
Rear: 19x9.5 +35 Bridgestone Potenza S-04 Pole Position 265/35/19
Slight rub on full lock turns in front.
Last edited by XSV; May 27, 2017 at 09:36 AM.

so heres the set up i was running
Volk Progressiv ME
19x8.5 +35 with 225/40/19
19x9.5 +35 with 255/35/19
Bridgestone Potenza S-04 Pole Position
The weirdo sizes are cause the GS had AWD and i wanted to keep the circumference difference as minimal as possible for the staggered fitment
will these sizes work on the IS without rubbing? tire calculations says that both front and rears are a 4% difference from stock so the speedo will be off a bit, but not a whole lot. However the overall height of the set will be 1" taller than stock,
and I dont plan on lowering if i get it. I really want to be able to use the setup cause they only saw 1 summer (barely 4000km's) and the TPMS sensors will program over to the IS.
So what chu guys think?
heres a pic of the wheels for reference (the color wasnt my choice, they were red when i bought them so theyre staying that way lol)

so heres the set up i was running
Volk Progressiv ME
19x8.5 +35 with 225/40/19
19x9.5 +35 with 255/35/19
Bridgestone Potenza S-04 Pole Position
The weirdo sizes are cause the GS had AWD and i wanted to keep the circumference difference as minimal as possible for the staggered fitment
will these sizes work on the IS without rubbing? tire calculations says that both front and rears are a 4% difference from stock so the speedo will be off a bit, but not a whole lot. However the overall height of the set will be 1" taller than stock,
and I dont plan on lowering if i get it. I really want to be able to use the setup cause they only saw 1 summer (barely 4000km's) and the TPMS sensors will program over to the IS.
So what chu guys think?
heres a pic of the wheels for reference (the color wasnt my choice, they were red when i bought them so theyre staying that way lol)






