IS - 3rd Gen (2014-present) Discussion about the 2014+ model IS models

Carbon Fiber Mirror Covers

Thread Tools
 
Search this Thread
 
Old Aug 2, 2016 | 04:12 PM
  #46  
RocketG35's Avatar
RocketG35
Intermediate
10 Year Member
Liked
Loved
 
Joined: Feb 2015
Posts: 329
Likes: 19
From: SF Bay Area, CA
Default

Originally Posted by 14is350
Those pis are without clear bra yet. My mirrors were previously wrapped in 3M CF and yes there are slight areas where 3M CF is exposed. I really like the covers, also really liked my 3M until these mirror covers came out.
Hmm, so if you have non-black mirror caps or didn't wrap it, you'll see the original mirror cover (i.e. Ultra White) peeking through the bottom?
Reply
Old Aug 2, 2016 | 06:39 PM
  #47  
14is350's Avatar
14is350
Rookie
 
Joined: May 2015
Posts: 64
Likes: 1
From: California
Default

It's so small you would never see it unless you kneeled down and looked under the mirror. That angle of the picture is like completely underneath the mirror. And again it's CF and an aftermarket product so can't completely expect perfection. I would buy it over again. Really great addition
Reply
Old Aug 3, 2016 | 05:58 AM
  #48  
Cthan3o3's Avatar
Cthan3o3
Thread Starter
Driver
iTrader: (1)
 
Joined: Oct 2015
Posts: 64
Likes: 1
From: Co
Default

14is350, any tips on how to vinyl wrap the mirror base? Is there any edge overlap or were you able to get the wrap around the base in one smooth finish?
Reply
Old Aug 3, 2016 | 07:59 AM
  #49  
14is350's Avatar
14is350
Rookie
 
Joined: May 2015
Posts: 64
Likes: 1
From: California
Default

Just pull and stretch vinyl around base in circular motion. Your going to need to manipulate the mirror head itself closed, regular position and then open in order to finish off the top off the base just folding the vinyl on top. You'll never actually see the top because the mirror should normally be in its regular position unless you're folding it in while in park, so if its not perfect, don't stress.
Reply
Old Aug 4, 2016 | 09:57 AM
  #50  
CrackerJac's Avatar
CrackerJac
Driver
 
Joined: Feb 2007
Posts: 144
Likes: 0
From: Mo
Default

Can we get a picture from a distance of them now that you have wrapped the little neck at the bottom with vinyl?
Reply
Old Aug 4, 2016 | 11:06 AM
  #51  
14is350's Avatar
14is350
Rookie
 
Joined: May 2015
Posts: 64
Likes: 1
From: California
Default

Originally Posted by CrackerJac
Can we get a picture from a distance of them now that you have wrapped the little neck at the bottom with vinyl?
here you are. A bit overcast today but you get the idea
Attached Thumbnails Carbon Fiber Mirror Covers-image.jpeg  
Reply
Old Aug 4, 2016 | 11:09 AM
  #52  
14is350's Avatar
14is350
Rookie
 
Joined: May 2015
Posts: 64
Likes: 1
From: California
Default



Originally Posted by CrackerJac
Can we get a picture from a distance of them now that you have wrapped the little neck at the bottom with vinyl?
Reply
Old Aug 4, 2016 | 11:36 AM
  #53  
EffSport's Avatar
EffSport
Driver School Candidate
 
Joined: Sep 2014
Posts: 37
Likes: 0
From: SJ, California
Default

Does anyone have a photo of the covers on but without the neck wrap? full car view
Reply
Old Aug 5, 2016 | 03:08 PM
  #54  
CrackerJac's Avatar
CrackerJac
Driver
 
Joined: Feb 2007
Posts: 144
Likes: 0
From: Mo
Default

Originally Posted by 14is350
here you are. A bit overcast today but you get the idea
Dang man, loving your car! I hate to ask again, but could you post a photo or two when its sunny out with the new carbon mirrors? I have a white IS250 myself and definitely getting the feel for this!
Reply
Old Aug 6, 2016 | 07:50 AM
  #55  
AAC's Avatar
AAC
Rookie
 
Joined: Nov 2015
Posts: 77
Likes: 8
From: Ct
Default

This is my lex with the carbon fiber mirror covers


Reply
Old Aug 6, 2016 | 11:15 AM
  #56  
Phamkq's Avatar
Phamkq
Driver
 
Joined: Jun 2016
Posts: 183
Likes: 8
From: CA
Default

Just wondering, has anyone considered getting their OEM mirrors hydrodipped? In SoCal, I was quoted about $100 for both of them. I've seen hydrodipped products in person and they look like the real deal (if they do a good job). That way, the cover will fit 100%
Reply
Old Aug 6, 2016 | 10:50 PM
  #57  
Ray20213's Avatar
Ray20213
Lead Lap
 
Joined: Feb 2016
Posts: 432
Likes: 14
From: Ca
Default Hey

Originally Posted by Phamkq
Just wondering, has anyone considered getting their OEM mirrors hydrodipped? In SoCal, I was quoted about $100 for both of them. I've seen hydrodipped products in person and they look like the real deal (if they do a good job). That way, the cover will fit 100%
so im in so cal too where or who does the hydrodipping could u please pass on the info thanx
Reply
Old Aug 7, 2016 | 06:30 AM
  #58  
Phamkq's Avatar
Phamkq
Driver
 
Joined: Jun 2016
Posts: 183
Likes: 8
From: CA
Default

Originally Posted by Ray20213
so im in so cal too where or who does the hydrodipping could u please pass on the info thanx
I believe they were "Hydro Method", I went through my Instagram DM (since that was where i was quoted) but no luck since i clear it up time to time.
Reply
Old Aug 7, 2016 | 09:24 AM
  #59  
14is350's Avatar
14is350
Rookie
 
Joined: May 2015
Posts: 64
Likes: 1
From: California
Default

Originally Posted by CrackerJac
Dang man, loving your car! I hate to ask again, but could you post a photo or two when its sunny out with the new carbon mirrors? I have a white IS250 myself and definitely getting the feel for this!
Sorry boss. Been busy these last couple days. I'll get her out today get some pics with sunlight for you
Reply
Old Aug 7, 2016 | 09:33 AM
  #60  
14is350's Avatar
14is350
Rookie
 
Joined: May 2015
Posts: 64
Likes: 1
From: California
Default

Originally Posted by Phamkq
Just wondering, has anyone considered getting their OEM mirrors hydrodipped? In SoCal, I was quoted about $100 for both of them. I've seen hydrodipped products in person and they look like the real deal (if they do a good job). That way, the cover will fit 100%
Originally Posted by Ray20213
so im in so cal too where or who does the hydrodipping could u please pass on the info thanx
Originally Posted by Phamkq
I believe they were "Hydro Method", I went through my Instagram DM (since that was where i was quoted) but no luck since i clear it up time to time.
ive heard both good and bad with hydro dipping. To each their own. I bet it would still turn out really nice.
Reply



All times are GMT -7. The time now is 08:03 PM.