Mod Binge- Cusco Bar too?
Thread Starter
Lexus Test Driver
Joined: Apr 2013
Posts: 1,076
Likes: 13
From: Virginia
Would you be amenable to a results with a 95% confidence interval? In that case I will run my Monte Carlo simulation and give you a result (range in which ride quality changes).
Thread Starter
Lexus Test Driver
Joined: Apr 2013
Posts: 1,076
Likes: 13
From: Virginia
new bolts- great idea!
Looked nice, but I could slightly bend it with just my arms and not putting it over my knee. The real issue was the cheap alien bolts it came with and the fact that the space between the tabs was a little too much so you really had to crank down on the bolts to "lock" the bar in place.
The second time I removed it (to change spark plugs I belive) bolt snapped upon loosening!
Easy fix tho, I went to Lowes and bought the largest grade 8 bolts that would fit the holes also one washer for each side and I could now crank those bolts to like 75 ft pounds with no complaints from the hardware!
I recommend if any of you do buy the Cusco bar, go down to Lowe's and spend a whole $3.50 on some VASTLY SUPERIOR bolts and though away the chinsy little alien bolts it come wit!
[/QUOTE]
Looked nice, but I could slightly bend it with just my arms and not putting it over my knee. The real issue was the cheap alien bolts it came with and the fact that the space between the tabs was a little too much so you really had to crank down on the bolts to "lock" the bar in place.
The second time I removed it (to change spark plugs I belive) bolt snapped upon loosening!
Easy fix tho, I went to Lowes and bought the largest grade 8 bolts that would fit the holes also one washer for each side and I could now crank those bolts to like 75 ft pounds with no complaints from the hardware! I recommend if any of you do buy the Cusco bar, go down to Lowe's and spend a whole $3.50 on some VASTLY SUPERIOR bolts and though away the chinsy little alien bolts it come wit!
[/QUOTE]
Pole Position
Joined: Jan 2015
Posts: 367
Likes: 3
From: CA
I was going to drop a peg or two through the bolt and crossmember. I have to see it when it gets here. Yeah, you'd have to line up the hole(s) every time you put the bolt back, but that's not a big deal. Better bolts never hurt either.
[/QUOTE]
new bolts- great idea!
Looked nice, but I could slightly bend it with just my arms and not putting it over my knee. The real issue was the cheap alien bolts it came with and the fact that the space between the tabs was a little too much so you really had to crank down on the bolts to "lock" the bar in place.
The second time I removed it (to change spark plugs I belive) bolt snapped upon loosening! Easy fix tho, I went to Lowes and bought the largest grade 8 bolts that would fit the holes also one washer for each side and I could now crank those bolts to like 75 ft pounds with no complaints from the hardware!
I recommend if any of you do buy the Cusco bar, go down to Lowe's and spend a whole $3.50 on some VASTLY SUPERIOR bolts and though away the chinsy little alien bolts it come wit!
Looked nice, but I could slightly bend it with just my arms and not putting it over my knee. The real issue was the cheap alien bolts it came with and the fact that the space between the tabs was a little too much so you really had to crank down on the bolts to "lock" the bar in place.
The second time I removed it (to change spark plugs I belive) bolt snapped upon loosening!
Easy fix tho, I went to Lowes and bought the largest grade 8 bolts that would fit the holes also one washer for each side and I could now crank those bolts to like 75 ft pounds with no complaints from the hardware! I recommend if any of you do buy the Cusco bar, go down to Lowe's and spend a whole $3.50 on some VASTLY SUPERIOR bolts and though away the chinsy little alien bolts it come wit!
Pole Position
Joined: Jan 2015
Posts: 367
Likes: 3
From: CA
There is ghetto way of testing rigidity buy trying to measure the deflection of the body buy lifting it up at a corner. Computer software does this when they design new cars.
At the very least could make the car more safe in a front accident?
Here is a good read for you... http://www.motoiq.com/MagazineArticl...e-Chassis.aspx
At the very least could make the car more safe in a front accident?
Here is a good read for you... http://www.motoiq.com/MagazineArticl...e-Chassis.aspx
Thread Starter
Lexus Test Driver
Joined: Apr 2013
Posts: 1,076
Likes: 13
From: Virginia
Are you a lawyer Brett?
I had to look up "amenable". Being non-religious, no I would not consider myself amenable. And in the context of your question, I don't know should make a small positive difference in both ride and handling. From factory car feels stiffer than both my previous cars so I personally am not in a hurry to do this mod. But I hope you enjoy and report back. A good pic might be cool too.
I had to look up "amenable". Being non-religious, no I would not consider myself amenable. And in the context of your question, I don't know should make a small positive difference in both ride and handling. From factory car feels stiffer than both my previous cars so I personally am not in a hurry to do this mod. But I hope you enjoy and report back. A good pic might be cool too.Actually I'm a professional economist.
Definition of amenable: Ready to consent; agreeable.
Are you amenable to a change in schedule?
Thread Starter
Lexus Test Driver
Joined: Apr 2013
Posts: 1,076
Likes: 13
From: Virginia
Cusco update
Drove home today with the cusco and ride seemed more controlled and smooth. Maybe it is a placebo effect. Either way I paid 200 dollars and my car feels more smooth.
In terms of the scratched chrome coating, I just put carbon fiber sticky material on it, and the bar looks great!! It went right on the bar no problems and no creases or bubbles. Problem solved! Will post pic tomorrow!
In terms of the scratched chrome coating, I just put carbon fiber sticky material on it, and the bar looks great!! It went right on the bar no problems and no creases or bubbles. Problem solved! Will post pic tomorrow!
Rookie
Joined: Jan 2010
Posts: 83
Likes: 0
From: British Columbia
Hey mandy do you mind if ask, where did you order your tower bar from? Was it Mathieu Devert and I presume you have it on your car now and if so what score would you give it. I am thinking about ordering from him and it sounds like you got really good delivery from Japan. Thanks in advance.
Driver
Joined: Dec 2014
Posts: 185
Likes: 2
From: VA
Mandyfig, can you kindly post the link where you order this product, thanks in advance... Roy
Driver School Candidate
Joined: Sep 2014
Posts: 30
Likes: 0
From: VA
Roy - are you talking about the Cusco 188 540 A UZZ40 bar? If so, I ordered mine from FRSport.com. Roughly $180 + free shipping and I had it within a week.
My only dealing with this company but they were very professional and helpful on the phone.
My only dealing with this company but they were very professional and helpful on the phone.
Thread Starter
Lexus Test Driver
Joined: Apr 2013
Posts: 1,076
Likes: 13
From: Virginia
Have you installed it yet? Do you notice a difference?
Driver
Joined: Dec 2014
Posts: 185
Likes: 2
From: VA
Yep thanks Bilque, Jesus! now I'm looking at Carbing also...
nova
I have Carbing STB it also dose things when braking. it is a great bar but you must remove the bar to remove the cover to me no big deal.
I have Carbing STB it also dose things when braking. it is a great bar but you must remove the bar to remove the cover to me no big deal.
Last edited by bacardi11; Mar 31, 2015 at 11:04 AM.
Driver
Joined: Dec 2014
Posts: 185
Likes: 2
From: VA
I'm probably going to get the Carbing than the Cusco just simply for the reason of listening to you guys exchanging knowledges and comments about the two brands
Roy