My new LED DRL's installed
#31
Great posts and thank you to all who have shared, however maybe I'm too mechanical and not too electrical, but I have not seen any tips and/or pics of inside the engine compartment as to how you actually route and hook up the LED wires to the fuses. I see in my 02 SC430 fuse boxes on each side which are bolted down with bundled wires going into each box.
Please assist an electrically challenged CL member who is interested in this modification.
Please assist an electrically challenged CL member who is interested in this modification.
#32
DIY coming soon as I get my stash. Again our thanks to StillLine.
#33
Driver School Candidate
Join Date: Mar 2010
Location: VA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
@StillLine , do you have pictures of how you wired it?
Thanks.
Thanks.
mandyfig,
So, what about simply sticking the strips to the middle two ribs? If you desire more surface area for the tape on the back of the strip to stick to, fabricate your "L" bracket to stick between the two ribs flush with the leading edges of the ribs, and there you go. Just my 2 cents.
StillLine
So, what about simply sticking the strips to the middle two ribs? If you desire more surface area for the tape on the back of the strip to stick to, fabricate your "L" bracket to stick between the two ribs flush with the leading edges of the ribs, and there you go. Just my 2 cents.
StillLine
#34
If ya'll can wait a bit, I will do a detailed DIY on this. Hope to get my set next week. Keep posted.
#35
Lead Lap
Thread Starter
#36
Driver School Candidate
Join Date: Mar 2010
Location: VA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Do you know where the turn signal fuse is? Have you tried wiring it up in connection to the turn signal in such a way that the LED stays on during normal use however when you turn on the turn signal the led will turn off. It should be easy to do if you have a multi channel relay so the left and right led's are triggered on different logic.
#38
I'm Blinded just watching this video! I'm bless to say thank you to all the SC430 owners. Sometimes being the only one in my area with a sc430 I feel left out! Glad I found this forum! =)
#39
Do you know where the turn signal fuse is? Have you tried wiring it up in connection to the turn signal in such a way that the LED stays on during normal use however when you turn on the turn signal the led will turn off. It should be easy to do if you have a multi channel relay so the left and right led's are triggered on different logic.
Question though, the grille seems to be fake and is covered by a cowl, where did you pass the wires to the engine bay? Did you have to bore a hole?
#40
Note that I do not think we have a choice of the color (meaning the LED face itself). The color variation included in the box description talks about the color of LED emission.
See full detail of the box here:
Last edited by mandyfig; 06-30-13 at 06:37 AM.
#41
I just tested one strip, heck is bright.
#43
Quick check reveals that modification on the slits will be needed.
I am getting my LED fogs in today and I will study this option while I am on it.
Last edited by mandyfig; 06-30-13 at 07:23 AM.
#44
Pole Position
Join Date: Jun 2007
Location: Sunny Prestwick in Avon, IN
Posts: 283
Received 0 Likes
on
0 Posts
As far as the hook-up, I think you could wire so they come on when the ignition is on and put the remote in series so should you want to turn them off for any reason, you could via remote.
Thanks guys,
lar