It will never align 100% due to the headlights. Not too sure on the humming...ballasts?

 

I'll take the bumper off and check the wiring and make sure everything is secure. My fog lights have stopped working so I need to check the fuses.
But overall the headlights are a nice improvement.

 

Did you have any issues with the headlight washers? I can't remember if there was any issues with that.

 

Thanks very much Pics are a great help.

 

If you are stuck in any way, just let me know what you need as far as pics and i will take it.

 

Things you can do when removing the front bumper.

- Remove the Lexus emblem from the grill
- Convert yellow front marker to red for a uniform look
- Convert to HID fogs
- change wedge bulbs over to led
- you tell me

 

While you are at it, HID foglight is strongly recommended.

 

I did not have too much trouble with the headlight washers. Although, one of the washers is not completely flush on the bumper.
Things I updated today:
changed 168 bulbs to LED
Changed side marker lights to LED (AMBER)
Changed fog lights
Changed rear parking lights to LED

The alignment on the 02-05 bumper is not too bad. I just have one section thats a little off.

Note: I wish I lived in SOCAL

 

This would have a perfect time to see if i was right in saying that the 168 light is the source of the DRL.

Congrats on doing the swap

 

How hard was it for you to do the rear parking lights?

 

The rear parking lights is very quick and easy to change (at most 5 min.). You do not need to take the bumper off, just reach underneath the bumper and remove/replace the bulb.

For me the 168 was the cause of the ugly DRL light.

 

For the rear parking lights I used these,
http://cgi.ebay.com/ebaymotors/ws/eB...m=200312320119

I could not find any brighter LEDS, these look great.

 

Hi Talwang,
What HID fog do you recommend? THX.

 

Do you use an extra set of rear side markers when converting the fronts?

 

Can you take a pic of the section that is off?