CA SC300 Eiback springs/OEM shock & OEM sways
#1
SC300 Eiback springs/OEM shock & OEM sways
*** Both spring/shocks and sway bars are sold/gone***
Clearing out after the last round of mods/repairs... (and I guess I can't type "Eibach" properly).
All prices picked up near Long Beach - 90720. Don't want to ship.
Eibach springs on OEM shocks. Not sure how long they've been on there as they came with the car, but they look to be in good condition (both shocks and springs). No problems with them driving, replaced with coilovers. $50 for the set.
Front and rear OEM sway bars. Replaced with aftermarket sways. Have the bushings too. These are likely as old as the car (120k) but... they're bars. $15 for both. You can have the endlinks as well, but a couple are pretty trashed.
Thank you!
Clearing out after the last round of mods/repairs... (and I guess I can't type "Eibach" properly).
All prices picked up near Long Beach - 90720. Don't want to ship.
Eibach springs on OEM shocks. Not sure how long they've been on there as they came with the car, but they look to be in good condition (both shocks and springs). No problems with them driving, replaced with coilovers. $50 for the set.
Front and rear OEM sway bars. Replaced with aftermarket sways. Have the bushings too. These are likely as old as the car (120k) but... they're bars. $15 for both. You can have the endlinks as well, but a couple are pretty trashed.
Thank you!
Last edited by KoalaFD; 04-18-18 at 05:38 PM. Reason: Sold
#4
Hi Chuck,
I do still have the springs and shocks but I put them into remote storage because of the low interest. The sway bars were given to the roving metal guys because there was no interest at all.
Did some quick google research; it looks like these are Eibach Pro-Kit springs but for the Supra TT (front spring 8222.001 and rear 8222.002). They seemed to work fine on my SC300, though, so they may be very similar springs.
I do still have the springs and shocks but I put them into remote storage because of the low interest. The sway bars were given to the roving metal guys because there was no interest at all.
Did some quick google research; it looks like these are Eibach Pro-Kit springs but for the Supra TT (front spring 8222.001 and rear 8222.002). They seemed to work fine on my SC300, though, so they may be very similar springs.
#6
These were just sent off to their new home this morning.
In case you were wondering for reference, these lowered the car to about 1/2" between tire and fender in the back, and about 3/4" between fire and fender in the front. Like I said above, they were Supra Eibach pro-kit springs and the struts were actually Supra TT shocks.
Thanks for the interest. The sway bars are gone as well - no interest so they were given to the metal recycling guys.
In case you were wondering for reference, these lowered the car to about 1/2" between tire and fender in the back, and about 3/4" between fire and fender in the front. Like I said above, they were Supra Eibach pro-kit springs and the struts were actually Supra TT shocks.
Thanks for the interest. The sway bars are gone as well - no interest so they were given to the metal recycling guys.
Thread
Thread Starter
Forum
Replies
Last Post
Lex6583
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
1
07-29-12 09:07 PM