FS: Spoiler, JDM markers, TT parts, etc..Parts wanted too! check back for updates!
10-10-06, 08:06 PM
#1
Pole Position
Thread Starter
Join Date: Aug 2006
Location: Illinois
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
FS: Spoiler, JDM markers, TT parts, etc..Parts wanted too! check back for updates!
FOR SALE:All parts I have listed for sale are negotiable!!
UPDATED November 24th!!!
OBD1 6 speed ECU $225 shipped obo. Going AEM, so I don't need this.
RPS flywheel, 6 speed, brand new $OLD!!!
Stock US TT fuel rail and related items $OLD!!!
Brand new stock TT fuel pump hanger $55 shipped obo.
Used stock TT fuel pump hanger missing wiring connector $25 shipped obo. PUMP NOT INCLUDED. PUMP NOT FOR SALE.
JDM stock twins and all related components. Buy one part or take the whole lot.
The front turbo has severly chipped fins, the rear poured out oil when removed. $135 shipped for everything or if you want some misc peice just shoot an offer.
JDM cams $85 shipped obo.
Aristo upper oil pan $55 shipped obo.
93-96 Supra engine mounts, $100 shipped.
Black floor mats. I was told these were brand new Lexus mats. I'm not convinced that they were made by Toyota, nor that they are for the SC. Regardless, they're black mats with a Lexus logo. I paid $115 shipped for them. I'll take whatever I can get.
WANTED:
Greddy intake mani kit for TT.
Stock fuel pump hanger for SC300.
Clean black 92-96 front bumper. Perfer one with lip.
Wise sports front lip.
Black upper door panel trim.
Black floor mats. MUST be genuine, origonal, Lexus SC mats.
Black rear seat belt trim.
00-ish, black, IS300 Steering wheel with airbag from 5 speed car.
HKS DLI
RC 1000 CC injectors (Low Impedence, Peak/Hold.)
UPDATED November 24th!!!
OBD1 6 speed ECU $225 shipped obo. Going AEM, so I don't need this.
RPS flywheel, 6 speed, brand new $OLD!!!
Stock US TT fuel rail and related items $OLD!!!
Brand new stock TT fuel pump hanger $55 shipped obo.
Used stock TT fuel pump hanger missing wiring connector $25 shipped obo. PUMP NOT INCLUDED. PUMP NOT FOR SALE.
JDM stock twins and all related components. Buy one part or take the whole lot.
The front turbo has severly chipped fins, the rear poured out oil when removed. $135 shipped for everything or if you want some misc peice just shoot an offer.
JDM cams $85 shipped obo.
Aristo upper oil pan $55 shipped obo.
93-96 Supra engine mounts, $100 shipped.
Black floor mats. I was told these were brand new Lexus mats. I'm not convinced that they were made by Toyota, nor that they are for the SC. Regardless, they're black mats with a Lexus logo. I paid $115 shipped for them. I'll take whatever I can get.
WANTED:
Greddy intake mani kit for TT.
Stock fuel pump hanger for SC300.
Clean black 92-96 front bumper. Perfer one with lip.
Wise sports front lip.
Black upper door panel trim.
Black floor mats. MUST be genuine, origonal, Lexus SC mats.
Black rear seat belt trim.
00-ish, black, IS300 Steering wheel with airbag from 5 speed car.
HKS DLI
RC 1000 CC injectors (Low Impedence, Peak/Hold.)
Last edited by TT6SPDSC; 11-24-06 at 07:02 AM.
10-11-06, 09:57 PM
#4
Driver School Candidate
Join Date: Oct 2003
Location: North Carolina
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
TT6SPDSC,
Couple things. I have the throttle cable and engine mount brackets. If you still need it.
As for your resistor box, you will NOT need it if you are running the aem injector driver. Also there are a few other manufactures of injectors that are "low impedance" 2.3 ohm that are less money and perform just as well. If you need a good set, I can get them for about 420.00 shipped. (delphi injectors 1000cc)
I hope that helps and if you need some other parts, let me know. Usually on projects like this there are always things missed.
Rich
Couple things. I have the throttle cable and engine mount brackets. If you still need it.
As for your resistor box, you will NOT need it if you are running the aem injector driver. Also there are a few other manufactures of injectors that are "low impedance" 2.3 ohm that are less money and perform just as well. If you need a good set, I can get them for about 420.00 shipped. (delphi injectors 1000cc)
I hope that helps and if you need some other parts, let me know. Usually on projects like this there are always things missed.
Rich
10-11-06, 10:39 PM
#5
Pole Position
Thread Starter
Join Date: Aug 2006
Location: Illinois
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Rich,
Thanks for the info! I had just figured out earlier this evening that I won't need the stock inj resistor box. So, I guess I'm looking for one of the Honda? plugs to replace it with. Any chance you know where to get that or know the part number?
I'm also told that the RC injectors are closer to 5 ohm and the Precisions are 2.3-2.3. Any truth to this? I thought they were both Lucas injectors...
Ugh, I know I'm going to be missing a ton of stuff...
I've got a Camry 5S cable that I think I can shorten up to make work, but if you've got a TT cable for a fair price I may just take it instead. PM me what you need for the TT throttle cable. Shipping is to 61801 I may also need the cruise cable, not too sure yet...
As for the mounts I'm still waiting on my package from Japan. I think it has a set of 1J Supra mounts and brackets, 2J Supra mounts and brackets, and a set of 2J TRD Supra mounts. I'm just not sure on wether the 2J mount brackets are early or late...
Thanks,
Grant.
Thanks,
Grant.
Thanks for the info! I had just figured out earlier this evening that I won't need the stock inj resistor box. So, I guess I'm looking for one of the Honda? plugs to replace it with. Any chance you know where to get that or know the part number?
I'm also told that the RC injectors are closer to 5 ohm and the Precisions are 2.3-2.3. Any truth to this? I thought they were both Lucas injectors...
Ugh, I know I'm going to be missing a ton of stuff...
I've got a Camry 5S cable that I think I can shorten up to make work, but if you've got a TT cable for a fair price I may just take it instead. PM me what you need for the TT throttle cable. Shipping is to 61801 I may also need the cruise cable, not too sure yet...
As for the mounts I'm still waiting on my package from Japan. I think it has a set of 1J Supra mounts and brackets, 2J Supra mounts and brackets, and a set of 2J TRD Supra mounts. I'm just not sure on wether the 2J mount brackets are early or late...
Thanks,
Grant.
Thanks,
Grant.
Trending Topics
10-21-06, 06:09 AM
#11
Pole Position
Thread Starter
Join Date: Aug 2006
Location: Illinois
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
11-02-06, 08:46 PM
#13
Pole Position
Thread Starter
Join Date: Aug 2006
Location: Illinois
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Injectors sold.
Tial wastegate sold.
And I bought a GT40R, an HKS header, and an HKS GT wastegate! Whoot!
Everything else either still fs or still wanted!!! Prices are negotiable!!
Tial wastegate sold.
And I bought a GT40R, an HKS header, and an HKS GT wastegate! Whoot!
Everything else either still fs or still wanted!!! Prices are negotiable!!
11-03-06, 05:10 AM
#15
Pole Position
Thread Starter
Join Date: Aug 2006
Location: Illinois
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
I do still need the stock pump hanger and early MKIV Supra engine mount brackets. I'd be fine with trading, but I think that someone is going to send payment for the emblem. If they fall through I'll lyk. What do you want for the pump hanger??