View Poll Results: GOOD HANDY GUIDE
YES
20
95.24%
NO
1
4.76%
Voters: 21. You may not vote on this poll
Sc400 How To Replace Old Door Regulators Step By Step
#1
Pole Position
Thread Starter
Sc400 How To Replace Old Door Regulators Step By Step
*************NOT 56K FRIENDLY************
I TRIED AND TRIED TO SEARCH AND I FOUND ONLY SHORT DESCRIPTIONS ON HOW THIS PROCESS SHOULD BE COMPLETED.....i figured id make other ppls life easier and take piXS with description!
this is my past weekend project!!! to some this might come handy i hope-- i would take almost every pic possible to remove and dissasemble the door with reg. and motor.
total time: driver side was first: 58 minutes
passenger door: 24 minutes!!!
this is not a very difficult replacement and if you follow my steps (21 pictures)
you will not have any problems at all. feel free to pm me with any questions!
i dont believe there is a stupid question like some ... there is only a stupid answer
tools needed:
flat head and phillips screwdriver
your hands
14mm tool.
GOOD LUCK!
YOUR COMMENTS ARE MORE THAN WELCOME!
I TRIED AND TRIED TO SEARCH AND I FOUND ONLY SHORT DESCRIPTIONS ON HOW THIS PROCESS SHOULD BE COMPLETED.....i figured id make other ppls life easier and take piXS with description!
this is my past weekend project!!! to some this might come handy i hope-- i would take almost every pic possible to remove and dissasemble the door with reg. and motor.
total time: driver side was first: 58 minutes
passenger door: 24 minutes!!!
this is not a very difficult replacement and if you follow my steps (21 pictures)
you will not have any problems at all. feel free to pm me with any questions!
i dont believe there is a stupid question like some ... there is only a stupid answer
tools needed:
flat head and phillips screwdriver
your hands
14mm tool.
GOOD LUCK!
YOUR COMMENTS ARE MORE THAN WELCOME!
Last edited by MERXUS; 03-10-08 at 09:48 PM.
The following users liked this post:
Photon440 (06-10-22)