Ok, so im finally installing my turbo and started by doing the 2mm greddy headgasket swap. I pulled everything so far but the head bolts because i need that special bi-hexagon socket so i can take the bolts out. I ordered this today and will have it in the morning. Then the head is coming out, getting decked, vacuum cleaned, and a possible valve job. Then im putting everything back together with the turbo

I set the manifold and turbo on just to see what it was going to look like, its sagging a little because there are no nuts on any of the studs, its just placed on there.

 

what size turbo is that? I am already running dave's manifold with a TA49

 

PT51 turbo.

I just took off the intake manifold and head. Taking the head to the machine shop on monday to get decked, vaccum cleaned, and possible valve job.

Here is a pic of the block

 

 

those pistons look like they could use some cleaning, check out this article

http://supraforums.com/showthread.ph...hreadid=114940

the stuff motorheaddown suggests in that thread works great!!